FAXON PRO 8.5" 9MM PCC PISTOL
FaxonDescription
AR15 Firearms › PRO › PRO 8.5″ 9mm Pistol
Firearm: ships to a licensed dealer (FFL). Enter your FFL at checkout. Federal, state, and local laws on firearms, pistol braces, barrel length, magazines, and muzzle devices apply; know and follow the laws where you live.
What’s on This Pistol
The parts that decide how an AR-15 shoots are Faxon parts, and each one is sold on its own: every card links to its product page, specs, and reviews.
BARREL
Duty Series 8.5″ Light Taper 9mm barrel ›
4150 CMV, QPQ Nitride, 1:10 twist, blowback, 1/2x28 muzzle. Every barrel is borescoped, bore and groove air gauged, headspace gauged with GO/NO-GO gauges, and 100% wet magnetic particle inspected before it ships.
UPPER RECEIVER
Faxon forged lightweight AR-15 upper
7075-T6 forging, Type III hard coat. Lightweight 7075-T6 forging, anodized; the upper Faxon builds its 9mm PCCs on.
LOWER RECEIVER
Faxon forged 9mm small-frame lower (AR-9)
Forged 7075-T6, black anodized, made for Glock®-pattern 9mm magazines, with a 9mm lower parts kit and a tensioning screw.
HANDGUARD
Streamline aluminum M-LOK 7″ handguard ›
6061 aluminum, hard coat anodized, M-LOK on all 8 surfaces, free-floated.
BOLT CARRIER GROUP
Superfinished 9mm PCC blowback full-mass BCG, Gen 2 ›
Full-mass blowback carrier for Glock- and Colt-pattern 9mm lowers, nitrided.
CHARGING HANDLE
Faxon Edition BREEK® Sledgehammer ›
Ambidextrous and gas-blocking, built for rifles that run suppressed.
Controls, Furniture, and What’s in the Box
| Trigger | Faxon Enhanced Match Trigger by Schmid® |
| Safety | Ambidextrous 45/90 safety selector |
| Charging handle | Faxon Edition BREEK® Sledgehammer, ambidextrous, gas-blocking |
| Stock / brace | SB Tactical® SBA3 pistol brace |
| Grip / trigger guard | B5 Systems® P-Grip, B5 Systems® trigger guard |
| Buffer | 5.5 oz 9mm buffer and carbine action spring |
| In the box | Elite Tactical Systems 31-round 9mm, Glock®-pattern magazine, cable lock, chamber flag, owner’s manual |
What PRO Means
The PRO line builds on the SPORT foundation with configurations inspired by law enforcement and experienced shooters. Each one is set up around its cartridge, then upgraded with the parts experienced owners end up buying anyway: the Faxon Enhanced Match Trigger by Schmid®, an ambidextrous safety, the Faxon Edition BREEK® Sledgehammer gas-blocking charging handle, B5 Systems® furniture or an SB Tactical® brace, and an optimized Faxon muzzle device. See every PRO firearm or compare all four lines.
Why 9mm in a 8.5″ pistol
A 9mm AR shoots soft, costs less per round, and is quiet with a can. It’s straight blowback: no gas system, so the full-mass carrier and buffer do the work. The barrel’s extension is milled as one piece with the barrel, and the lower runs Glock®-pattern magazines, the same ones the most common duty pistols use.
Running a Suppressor
The muzzle is threaded 1/2x28 with a 9mm bore. Remove the muzzle device and thread on a 9mm direct-thread can, or add a Plan B compatible 9mm flash hider for a HUB mount. A blowback 9mm has no gas to tune; 147 gr loads are subsonic.
How It’s Built and Inspected
| Barrel | 4150 CMV, button rifled; extension milled as one piece with the barrel, so there is nothing to torque; salt-bath QPQ nitride inside and out |
| Barrel inspection | Borescoped after reaming, rifling, and chambering; bore and groove air gauged; chamber checked on a CMM program first and last of every run; muzzle threads gauged; headspace gauged; 100% wet MPI |
| Receivers | 7075-T6 forgings, Type III hard coat; barrel threads gauged on every upper, CMM checked every shift |
| Assembly | Assembled, inspected, and packed by Faxon in Greater Cincinnati, Ohio |
| Process control | Full CMM first-article inspection after any machine maintenance, tool change, or part change, and at least every 30 days; material certs checked at receiving; stress relief and nitride certified by lot |
What Makes a Good AR-15 Pistol, and How This One Stacks Up
Reviewers who rank AR-15s weigh the same things: reliability, accuracy, build quality, and value, which come down to the barrel, the gas system, the bolt carrier group, the trigger, and the receivers. Here’s this one, part by part.
| Barrel | 4150 CMV, button rifled, QPQ nitrided, and 100% inspected. Faxon makes it in-house; most rifle brands buy theirs. |
| Gas system | Blowback, matched to a full-mass carrier and 5.5 oz buffer |
| Bolt carrier group | Superfinished 9mm PCC blowback full-mass BCG, Gen 2: Full-mass blowback carrier for Glock- and Colt-pattern 9mm lowers, nitrided |
| Trigger | Faxon Enhanced Match Trigger by Schmid® |
| Handguard | 7″ free-float aluminum M-LOK, all 8 surfaces |
| Receivers | Forged 7075-T6, trued, with a tensioning screw |
| Warranty | Faxon Lifetime Guarantee |
Specifications
| Caliber / chamber | 9mm Luger |
| Barrel | Duty Series 8.5″ Light Taper, 4150 CMV, QPQ Nitride |
| Twist | 1:10, button rifled |
| Gas system | Blowback (no gas system) |
| Muzzle | Rowdy Pineapple 9mm venturi muzzle device, 1/2x28, stainless |
| Handguard | 7″ Streamline aluminum, M-LOK on all 8 surfaces, free-float |
| Receivers | Faxon forged lightweight AR-15 upper; Faxon forged 9mm small-frame lower, AR-9 (Glock®-pattern magazines) |
| Finish | Type III hard coat anodized |
| Bolt carrier group | Superfinished 9mm PCC blowback full-mass BCG, Gen 2 |
| Made in | Greater Cincinnati, Ohio, USA |
| Warranty | Faxon Lifetime Guarantee |
| MSRP | $1,540 |
Fitment
| Magazines | Glock®-pattern 9mm magazines |
| Bolt | Gen 2 full-mass 9mm blowback BCG (Glock and Colt compatible) (installed) |
| Suppressor | Direct-thread or muzzle-device mount on the 1/2x28 thread |
| Optics | Flat-top Picatinny upper; M-LOK handguard for lights and lasers |
| Transfer | Ships to a licensed dealer (FFL) |
What Reviewers and Owners Say
This configuration is new, so it has few reviews of its own yet. Every major part on it is sold on its own, so here’s what independent reviewers and Faxon customers have said about the barrel, receivers, carrier, handguard, and gas block.
PEW PEW TACTICAL
Review of Faxon’s earlier 9mm PCC upper, built on the same blowback barrel and BCG approach.
“We had zero issues with feeding or ejection during our testing sesh with the Bantam.”
OPTICSPLANET
Faxon 9mm Blowback BCG Reviews ›
Verified buyer on the Gen 2 9mm BCG (4.8 stars at OpticsPlanet).
“This is an excellent 9mm BCG. Fits standard AR upper. Highly recommend.”
PEW PEW TACTICAL
Review of Faxon’s earlier Ascent rifles, built on Faxon barrels.
“Both guns ran great! They fed, fired, and ejected as intended with no issues.”
“fed everything from FMJ’s to gaping hollow points, 115,124, 147 and plus P.”
kristoher, 8.5″ Light Taper 9mm barrel, FaxonFirearms.com
“I have to say that the finish quality is superb.”
Peter, 8.5″ Light Taper 9mm barrel, FaxonFirearms.com
“Only around 500 rounds with it. Been flawless”
Kevin Schapker, BCG, FaxonFirearms.com
“a much needed upgrade over the stock handle.”
Jessie, charging handle, FaxonFirearms.com
Average ratings on FaxonFirearms.com, out of 5 stars: 8.5″ Light Taper 9mm barrel: 4.8; BCG: 5.0.
Compare the PRO Line
| Model | Caliber | Barrel | Handguard | MSRP |
|---|---|---|---|---|
| PRO 16″ 5.56 NATO AR15 Rifle | 5.56 NATO | 16″ Gunner, 1:8 | 15″ aluminum | $1,345 |
| PRO 16″ 22 ARC AR15 Rifle | 22 ARC | 16″ Gunner, 1:7 | 15″ aluminum | $1,485 |
| PRO 16″ 6.5 Grendel AR15 Rifle | 6.5 Grendel | 16″ Gunner, 1:8 | 15″ aluminum | $1,485 |
| PRO 16″ 6mm ARC AR15 Rifle | 6mm ARC | 16″ Gunner, 1:7.5 | 15″ aluminum | $1,485 |
| PRO 8.5″ 9mm PCC Pistol (this one) | 9mm | 8.5″ Light Taper, 1:10 | 7″ aluminum | $1,540 |
| PRO 12.5″ 5.56 NATO AR15 Pistol | 5.56 NATO | 12.5″ Gunner, 1:8 | 10.75″ aluminum | $1,550 |
| PRO 12.5″ 6mm ARC AR15 Pistol | 6mm ARC | 12.5″ Gunner, 1:7.5 | 10.75″ aluminum | $1,556 |
| PRO 12.5″ 338 ARC AR15 Pistol | 338 ARC | 12.5″ Gunner, 1:8 | 10.75″ aluminum | $1,590 |
| PRO 12.5″ 5.56 NATO AR15 SBR | 5.56 NATO | 12.5″ Gunner, 1:8 | 10.75″ aluminum | $1,590 |
| PRO 14.5″ M4 5.56 AR15 SBR | 5.56 NATO | 14.5″ M4, 1:7 | 7″ aluminum | $1,600 |
| PRO 16″ 9mm PCC Rifle | 9mm | 16″ Light Taper, 1:10 | 15″ aluminum | $1,630 |
PRO 8.5″ 9mm FAQs
Is the Faxon PRO 8.5″ 9mm PCC Pistol a good 9mm PCC?
It’s built around the parts that matter most: a Faxon Duty Series 4150 CMV barrel that’s borescoped, air gauged, headspace gauged, and 100% MPI inspected; Faxon forged receivers; the Superfinished 9mm PCC blowback full-mass BCG, Gen 2; a Schmid® match trigger; and a free-float M-LOK handguard. It’s assembled in Ohio by the company that makes the barrel, and it’s covered by the Faxon Lifetime Guarantee.
What comes in the box?
The complete PCC pistol, Elite Tactical Systems 31-round 9mm, Glock®-pattern magazine, cable lock, chamber flag, owner’s manual. Optics, sling, and suppressor are not included.
What ammunition and magazines does it use?
9mm Luger. Magazines: Glock®-pattern 9mm magazines. Bolt: Gen 2 full-mass 9mm blowback BCG (Glock and Colt compatible) (installed).
Can I put a suppressor on it?
Yes. The muzzle is threaded 1/2x28, so a direct-thread mount or a muzzle-device mount works. A blowback 9mm has no gas to tune.
Is this a pistol or a rifle?
It’s sold as a pistol: a 8.5″ barrel with an SB Tactical® SBA3 pistol brace, not a stock. Laws on AR pistols and pistol braces vary by state and locality and can change, so know and follow the laws where you live. Faxon doesn’t provide legal advice.
What does PRO add over SPORT?
Each one is set up around its cartridge, then upgraded with the parts experienced owners end up buying anyway: the Faxon Enhanced Match Trigger by Schmid®, an ambidextrous safety, the Faxon Edition BREEK® Sledgehammer gas-blocking charging handle, B5 Systems® furniture or an SB Tactical® brace, and an optimized Faxon muzzle device.
Nitride or chrome lining: which is better?
Chrome lining still has its place, mainly sustained automatic fire. For the vast majority of shooters, Faxon’s salt-bath QPQ nitride does what they need and more: it hardens the bore and exterior, resists corrosion, adds virtually nothing to the dimensions (a few ten-thousandths of an inch, about a tenth the width of a human hair), and needs little to no break-in.
How does it ship?
To a licensed dealer (FFL). Enter your dealer’s information at checkout. Federal, state, and local laws apply.
Where is it made, and what is the warranty?
Faxon makes the barrel, receivers, and muzzle device in Greater Cincinnati, Ohio, and assembles the PCC pistol there. It’s covered by the Faxon Lifetime Guarantee.
MuzzLok®, HARMONIX®, CORESYNC®, and Integral® are trademarks of Faxon Firearms. BREEK®, Schmid®, B5 Systems®, SB Tactical®, Magpul®, PMAG®, Lancer®, Mission First Tactical®, Cerakote®, and Glock® are trademarks of their owners; Faxon is not affiliated with them. “Plan B” is a trademark of Q, LLC; Faxon Firearms is not affiliated with, endorsed by, or sponsored by Q, LLC. Firearm, pistol brace, suppressor, and barrel-length laws vary by state and locality; know and follow the laws where you live.