Match Series Barrels

Faxon Match Series AR-15 & AR-10 Barrels

Faxon’s 416-R stainless line: 50 AR-15 and AR-10 barrels in ten cartridges, from 6″ 300 Blackout pistols to 24″ 6.5 Creedmoor gas guns, $188–$339. Every Match Series barrel is machined from 416-R stainless, 5R button rifled, air gauged, stress relieved, 100% wet magnetic particle inspected, and salt-bath QPQ nitrided inside and out. Each ships with a nickel-Teflon (NP3) barrel extension installed, torqued to 150 ft-lb, pinned, and headspace checked 100%, and every one is full-auto capable. Want a honed and lapped bore with an uncoated exterior? See the MATCH-X Series. Want 4150 CMV for hard use? See the Duty Series. Faxon AR-15 and AR-10 barrels have been voted Favorite Aftermarket Barrel by Shooting Sports Retailer every year since 2022, the Gold Award.

AR-15 • 14 BARRELS

223 Wylde ›

Precision and all-around AR-15s that shoot 5.56 and .223. 13.9″, 14.5″, 16″, 18″, 20″; $234–$306.

AR-15 • 4 BARRELS

6.5 Grendel ›

Deer, hogs, and long-range steel from an AR-15. 16″, 18″, 20″; $249–$301.

AR-15 • 4 BARRELS

6mm ARC ›

Long-range precision and hunting from an AR-15. 12.5″, 16″, 20″, 24″; $230–$308.

AR-15 • 3 BARRELS

22 ARC ›

Flat-shooting varmint, predator, and match rifles. 16″, 20″, 24″; $236–$310.

AR-15 • 5 BARRELS

338 ARC ›

Big-bore, suppressor-first AR-15s and pistols. 9″, 11.5″, 12.5″, 14.5″, 16″; $213–$227.

AR-15 • 5 BARRELS

300 Blackout ›

Short suppressed pistols and SBRs. 6″, 7.5″, 9″, 10.5″; $188–$197.

AR-10 • 4 BARRELS

.308 Win ›

Big-game hunting and long-range AR-10s. 18″, 20″; $319–$325.

AR-10 • 5 BARRELS

6.5 Creedmoor ›

Long-range steel, gas gun matches, and hunting. 18″, 20″, 22″, 24″; $328–$339.

AR-10 • 5 BARRELS

8.6 Blackout ›

Suppressed subsonics and hog-hunting AR-10s. 8″, 12″, 16″; $250–$306.

AR-10 • 1 BARREL

22 Creedmoor ›

Low-recoil AR-10 precision and predators. 22″; $337.

What “Match Series” Means

Match Series is Faxon’s 416-R stainless line. 416-R machines cleanly and holds a consistent bore, and Faxon button rifles it with 5R rifling: five lands with sloped sides instead of sharp corners, which deforms the bullet less and fouls less. Then every barrel is salt-bath QPQ nitrided inside and out. Nitride is a diffusion treatment, not a plating; it hardens the bore and adds corrosion resistance while adding virtually nothing to the dimensions, a few ten-thousandths of an inch, roughly a tenth the width of a human hair. It needs little to no break-in.

LineSteelBore / finishBest for
Match Series416-R stainless5R button rifled, QPQ nitride inside and outPrecision with nitride durability; the most popular Faxon stainless line
MATCH-X Series416-R stainlessHoned and lapped bore, uncoated exteriorThe most refined bore Faxon makes
Duty Series4150 CMVQPQ nitride inside and outHard use at the best price
Combat Series4150 CMVChrome-lined bore, manganese phosphateClassic configurations; chrome still has its place for sustained full-auto heat

Choose Your Cartridge

CartridgePlatformLengthsTwistMSRPBuilt for
223 WyldeAR-1513.9″, 14.5″, 16″, 18″, 20″1:8$234–$306Precision and all-around AR-15s that shoot 5.56 and .223
6.5 GrendelAR-1516″, 18″, 20″1:8$249–$301Deer, hogs, and long-range steel from an AR-15
6mm ARCAR-1512.5″, 16″, 20″, 24″1:7.5$230–$308Long-range precision and hunting from an AR-15
22 ARCAR-1516″, 20″, 24″1:7$236–$310Flat-shooting varmint, predator, and match rifles
338 ARCAR-159″, 11.5″, 12.5″, 14.5″, 16″1:5 / 1:8$213–$227Big-bore, suppressor-first AR-15s and pistols
300 BlackoutAR-156″, 7.5″, 9″, 10.5″1:5 / 1:8$188–$197Short suppressed pistols and SBRs
.308 WinAR-1018″, 20″1:10$319–$325Big-game hunting and long-range AR-10s
6.5 CreedmoorAR-1018″, 20″, 22″, 24″1:8$328–$339Long-range steel, gas gun matches, and hunting
8.6 BlackoutAR-108″, 12″, 16″1:6 / 1:3$250–$306Suppressed subsonics and hog-hunting AR-10s
22 CreedmoorAR-1022″1:8$337Low-recoil AR-10 precision and predators

Choose Your Profile

Gunner. Faxon’s Gunner profile puts steel where a barrel needs stiffness, at the chamber and under the handguard, and trims it out front, so you get Government-profile durability with close to Pencil-profile handling.

Pencil. The Pencil profile is Faxon’s lightest contour. It heats up quickly but also cools quickly, and because every Faxon Match barrel is stress relieved and 100% wet magnetic particle inspected, it is a surprisingly rugged barrel that punches above its weight. It is not a benchrest profile, and it is not meant to be.

Heavy Fluted. The Heavy Fluted profile starts with a heavy, stiff contour for precision and cuts straight flutes along the barrel to remove weight and add surface area for cooling, so you keep the rigidity without carrying all of the steel.

Flame Fluted. Flame Fluted® is Faxon’s patented flame-pattern fluting. The flowing cut removes weight and adds surface area for cooling while keeping a stiff contour, and it is the most distinctive-looking barrel Faxon makes.

Spiral Fluted. The Spiral Fluted profile wraps flutes around a heavy contour. It removes weight and adds surface area for cooling while the spiral keeps stiffness consistent around the barrel.

Target. The Target profile is a heavy, straight contour built for precision. It resists heat-driven group growth on long strings and keeps a 22 Creedmoor gas gun steady on target.

Gas Systems and Gas Blocks

Match Series barrels run pistol, carbine, mid, or rifle-length gas depending on length and cartridge, with .625″, .750″, or .875″ gas journals. Faxon recommends its patented adjustable gas block on every suppressed build: tune it for your can and ammunition, then open it back up unsuppressed. If you run a lightweight carrier, always pair it with an adjustable gas block.

Adjustable .625″ • Adjustable .750″ • Adjustable .875″ • Pistol tube • Carbine tube • Mid tube • Rifle tube

How Every Match Series Barrel Is Made

  1. 416-R bar gun-drilled and pull-reamed
  2. 5R button rifled
  3. Stress relieved at the blank stage
  4. Profiled, threaded, and target crowned
  5. Chamber cut and CMM-checked
  6. 100% wet magnetic particle inspected, then salt-bath QPQ nitrided inside and out
  7. Gas port drilled and reamed; NP3 extension torqued to 150 ft-lb, pinned, and 100% headspaced
  8. Laser-marked and final inspected

What Owners Say

Match Series barrels average 4.9 out of 5 stars across their reviews on FaxonFirearms.com. Owners report sub-MOA groups from 223 Wylde and 6.5 Grendel barrels, steel hits at 600 yards from the .308, and tight suppressed groups from the short 300 Blackouts. Each product page quotes its own owners and links the dealer listings. Faxon AR-15 and AR-10 barrels have been voted Favorite Aftermarket Barrel by Shooting Sports Retailer every year since 2022, the Gold Award.

Match Series FAQs

What is the difference between Match Series and MATCH-X?

Both are 416-R stainless with 5R rifling. Match Series is salt-bath QPQ nitrided inside and out for durability. MATCH-X has a honed and lapped bore and an uncoated exterior.

What is the difference between Match Series and Duty Series?

Match Series is 416-R stainless; Duty Series is 4150 CMV. Both are QPQ nitrided inside and out and headspaced at the factory.

Are Match Series barrels full-auto capable?

Yes. Every Faxon nitrided rifle barrel is full-auto capable. Heat is the limit for any barrel; each product page has guidance on rates of fire, and groups open as a barrel heats while point of impact holds.

Do Match Series barrels need break-in?

Little to no break-in. The nitrided bore is smooth and hard from the start.

What comes with a Match Series barrel?

The barrel with its NP3 extension installed, torqued, pinned, and headspaced. Gas block, gas tube, and muzzle device are sold separately. 8.6 Blackout barrels also include a taper adapter.

Which gas block should I use?

Match the journal diameter on the product page (.625″, .750″, or .875″). Faxon recommends its patented adjustable gas block for suppressed builds and lightweight carriers.

Where are Match Series barrels made?

In Greater Cincinnati, Ohio, and every one is covered by the Faxon Lifetime Guarantee.