Yes. The FX-19-D-02 is a complete, serialized semi-automatic pistol. It ships with every component needed to fire, including two 10-round magazines, a removable RMR cover plate, a federally-required trigger lock, and the operator's manual. You will need to purchase 9mm Luger ammunition separately. All firearm purchases require transfer through a licensed FFL dealer.

Yes. The all-new FX-19 Gen 2 frame is engineered from the ground up for full Glock® 19 Gen 3 holster, parts, and accessory compatibility. Your Glock® 19 Gen 3 duty holster, weapon-mounted lights, aftermarket triggers, sights, magazine releases, slide stops, and other Gen 3 aftermarket parts will work with the FX-19 Duty. The pistol also accepts standard Glock® 19 magazines (10-round, 15-round, and extended capacities where legal).

Note: Glock® 19 Gen 4 / Gen 5 specific parts are not guaranteed to fit due to different frame rail and grip module geometry. The FX-19 Gen 2 frame matches Gen 3 dimensions specifically.

All four models share the new FX-19 Gen 2 frame and Glock® 19 Gen 3 compatibility. The differences are in the slide and barrel:

• FX-19 Duty (FX-19-D-02) — This pistol. Duty profile slide, Faxon Duty Series non-threaded barrel, factory-style trigger. Most accessible price point. $850 MSRP.
• FX-19 Patriot Gen 2 (FX-19-P-02) — Patriot profile slide, Faxon Match Series non-threaded barrel, premium components. $999 MSRP.
• FX-19 Hellfire Gen 2 (FX-19-HF-02) — Hellfire profile slide, Faxon Match Series threaded barrel for suppressor or compensator use. $1,050 MSRP.
• FX-19X Patriot / Hellfire (FX-19X-P-02 / FX-19X-HF-02) — Compact slides on full-size frames with 17+1 capacity for shooters who want more grip and capacity in the same shootable slide.

No — the FX-19 Duty ships with a non-threaded barrel and is not designed to accept a suppressor or compensator out of the box. If you need threaded-barrel features, the FX-19 Hellfire Gen 2 ships with a Faxon Match Series threaded barrel for direct suppressor or EXOS® compensator use.

You can also upgrade the FX-19 Duty after purchase by swapping in a Faxon threaded G19 barrel — the FX-19 Duty accepts standard Glock® 19 Gen 2-5 drop-in barrels.

The FX-19 Duty slide is factory-cut for the Trijicon RMR® footprint, which is one of the most widely supported optic patterns on the market. Compatible optics include the Trijicon RMR / RMRcc, Holosun 507C / 508T / 407C, and any other red dot using the standard RMR footprint.

The slide ships with a removable cover plate installed — just remove the cover plate screws, lift it off, and install your optic. Use the Night Fision® Optics-Ready Stealth Series rear sight for lower 1/3 co-witness with any RMR-footprint optic.

Important: Some mounting screws supplied with RMR-footprint optics may be too long and impinge on the extractor spring rod. Verify the extractor moves freely after installing your optic and use shorter screws or a thin shim if needed.

The FX-19 Duty ships with the Faxon Duty Series Barrel for G19 Gen 2-5 9mm in non-threaded configuration — the same barrel we sell as a drop-in upgrade for stock Glock® 19 Gen 3 pistols. It's machined in-house in Cincinnati, Ohio from 4150 CMV steel (the U.S. military mil-spec barrel alloy) and finished with a durable QPQ nitride treatment inside and out for hardness, corrosion resistance, and long service life.

Compared to a factory polygonal-rifled Glock® barrel, the Faxon Duty Series barrel uses conventional rifling, which is generally regarded as more forgiving with lead and reloaded ammunition.

FX-19 pistols cannot be shipped to CA, CT, DC, HI, IL, MD, MA, NJ, or NY. Shipments must go overnight to a licensed FFL dealer in your state. Verify your state and local handgun regulations before ordering. Faxon Firearms is not responsible for compliance with local handgun ordinances at the buyer's location.

The FX-19 Duty is designed, manufactured, and assembled by Faxon Firearms in Greater Cincinnati, Ohio. Faxon has operated as a precision machining company since 1978 and has been producing complete firearms since 2012. The frame, slide, barrel, and other Faxon-branded components are all made or assembled in-house. Partner components — the Night Fision® sights — are sourced from their original manufacturer, not aftermarket substitutes.

Every FX-19 Duty is covered by the Faxon Lifetime Guarantee.