Sold Out
FAXON DUTY SERIES BARREL FOR G19 GEN 2-5 9MM
Faxon
$90.35
(No reviews yet)
Write a Review
Faxon
FAXON DUTY SERIES BARREL FOR G19 GEN 2-5 9MM
FAXON DUTY SERIES BARREL FOR GLOCK® G19 GEN 2–5 9MM (GA910N19NGQ-N)
Duty-grade reliability with enhanced accuracy and longevity. The Faxon Duty Series Barrel for Glock® G19 Gen 2–5 9mm is engineered as a true drop-in upgrade, delivering tighter-than-factory tolerances while maintaining OEM-level reliability. Machined entirely in-house from stress-relieved 4150 CMV steel and finished in a durable salt bath nitride, this barrel is built for hard use, consistent lockup, and long service life.
Key Features
- Caliber: 9mm Luger
- Compatibility: Glock® G19 Gen 2–5
- Material: Stress-relieved 4150 CMV steel
- Rifling: Conventional rifling (safe for cast & coated lead bullets)
- Twist Rate: 1:10
- Crown: 11-degree target crown
- Finish: Salt bath nitride (inside & outside)
- Fitment: True drop-in — no gunsmithing required
- Origin: Made in the USA — Faxon Firearms
Built for Real-World Use
Faxon Duty Series pistol barrels are designed to exceed factory standards without sacrificing reliability. A SAAMI-spec 9mm chamber ensures broad ammunition compatibility, while tighter machining tolerances promote a more consistent lockup than OEM barrels. The result is improved accuracy potential with the dependability required for duty, carry, and training pistols.
Benefits
- Enhanced durability: 4150 CMV steel paired with nitride treatment increases surface hardness and wear resistance.
- Smoother cycling: Salt bath nitride improves lubricity and corrosion resistance.
- Ammo flexibility: Conventional rifling supports jacketed, plated, coated, and cast lead bullets.
- Improved consistency: Tighter-than-OEM tolerances deliver repeatable lockup.
- No fitting required: Designed as a true drop-in replacement.
Technical Specifications
| Series | Duty Series |
|---|---|
| Handgun Type | Glock® G19 (Gen 2–5) |
| Caliber | 9mm Luger |
| Barrel Material | Stress-Relieved 4150 CMV Steel |
| Barrel Profile | Drop-In |
| Twist Rate | 1:10 |
| Crown | 11-Degree Target Crown |
| Rifling Method | Button Rifled, Fully Stress Relieved |
| Rifling Type | Conventional |
| Muzzle Thread | None (Non-Threaded) |
| Finish | Salt Bath Nitride (Inside & Outside) |
| Part Number | GA910N19NGQ-N |
| UPC | 816341028456 |
| Country of Origin | Made in USA — Faxon Firearms |
Installation Notes
Always ensure firearms are unloaded and safe before installation.
- Remove factory barrel following Glock® manufacturer instructions.
- Install Faxon Duty Series barrel — no fitting required.
- Reassemble slide and perform a full function check.
- Test-fire with your chosen ammunition to confirm reliability.
FAQ
Will this barrel fit all Glock® G19 generations?
Yes. This barrel is compatible with Glock® G19 Gen 2 through Gen 5 pistols.
Can I shoot lead or coated bullets?
Yes. Faxon uses conventional rifling, which safely supports cast lead, coated, plated, and jacketed bullets.
Is this a match barrel?
This is a Duty Series barrel, designed to balance improved accuracy with maximum reliability for carry and service use.
Does this barrel require break-in?
No formal break-in is required, though function testing with your preferred ammunition is always recommended.
Notice: “GLOCK” is a federally registered trademark of GLOCK, Inc. and GLOCK Ges.m.b.H. Faxon Firearms is not affiliated with or endorsed by Glock.
Warranty: Faxon Firearms pistol barrels are backed by Faxon’s limited lifetime warranty against manufacturing defects under normal use. For full warranty details and exclusions, please visit https://faxonfirearms.com/warranty-privacy-terms/
Faxon Firearms pistol barrels are backed by Faxon’s limited lifetime warranty against manufacturing defects under normal use. Damage caused by improper installation, misuse, ammunition issues, or unauthorized modification is not covered.
Full warranty details: https://faxonfirearms.com/warranty-privacy-terms/
-
-
Sold Out
-
-
Sold Out
