FAXON MATCH SERIES SPIRAL FLUTED THREADED BARREL FOR G19 / G45 / G19X Gen 2–6 9MM NICKEL PVD

Faxon
SKU:
GB910N19HGQ-T-NI
|
UPC:
816341029958
Availability:
Usually ships within 2 business days when available.
$133.00
(No reviews yet)
Current Stock:

Description

Pistol Barrels › For Glock® › For G19  |  Works with: EXOS-513 for Gen 3 • EXOS-543 for Gen 4 • EXOS-553 for Gen 5

 

Match Series • G19 / G45 / G19X • 9mm

Faxon Match Series Spiral Fluted Threaded Barrel for Glock® 19, G45 & G19X, 9mm, Nickel PVD

9mm  |  4.47″  |  Spiral Fluted  |  1/2x28 Threaded  |  SKU: GB910N19HGQ-T-NI

A drop-in 9mm barrel for Glock® 19 Gen 2–6, Glock® 45, and Glock® 19X slides, machined from 416-R stainless with a Spiral Fluted profile and a 1/2x28 threaded muzzle. Faxon button rifles the bore 1:10 with six grooves, stress relieves and heat treats the steel, and finishes it in Nickel PVD.

DROP-IN FIT

Made for Glock® 19 Gen 2–6, Glock® 45, and Glock® 19X slides. No gunsmithing on factory-spec slides.

BUTTON RIFLED 1:10

Six-groove button rifling, air gauged. Runs jacketed and cast lead bullets.

416-R STAINLESS

Heat treated and stress relieved after rifling.

NICKEL PVD

Nickel PVD. Threaded 1/2x28, thread protector included.

MSRP $133  •  Made in Greater Cincinnati, Ohio  •  No FFL required

Fit and Compatibility

This barrel is a direct replacement for the factory barrel in Glock® 19 Gen 2–6, Glock® 45, and Glock® 19X slides. It is machined to tight tolerances for consistent lockup, and it drops into factory-spec slides with no gunsmithing. On some aftermarket slides, minor fitting may be needed.

Gen 6 compatibility: As of Job #16477 (engraved on the non-ejection side of the barrel hood), this barrel includes the Gen 6 relief cut and is compatible with the Glock® 19 Gen 2–6, the Glock® 45 (G45), and the Glock® 19X (G19X). Units made before Job #16477 are Gen 6 compatible, though increased wear in the area of the relief cut is possible.

The Glock® 45 and Glock® 19X are 9mm pistols with a G19-length slide and barrel on a G17-length frame, so they take a Glock® 19 barrel, not a .45 ACP barrel.

Aftermarket slides: there is a known compatibility issue with some Zaffiri Precision slides (ZPS.3v2 and ZPS.6 patterns) because of top-window size and placement.

Shipping: threaded barrels cannot be shipped to California.

How It’s Made

Every Faxon pistol barrel starts as a long 416-R stainless barrel blank that Faxon rifles in-house before it is ever cut into pistol barrels. That way the whole blank gets the same rifling, inspection, and stress relief, and every barrel cut from it starts from a qualified bore.

  1. Drill and ream: 416-R stainless bar gun-drilled and reamed as a long blank
  2. Button rifle: Button rifled 1:10, six grooves
  3. Air gauge: Bore and rifling air gauged
  4. Stress relieve: Stress relieved in-house after rifling, just like Faxon rifle barrels
  5. Cut and qualify: Blank cut to length and qualify-turned true to the bore
  6. Turn and mill: Hood, lugs, and Spiral Fluted profile turned and milled; 9mm SAAMI chamber and target crown cut; muzzle threaded 1/2x28
  7. Heat treat: 416-R heat treated to pistol-barrel hardness; 416-R isn’t hard enough for a pistol barrel as bar stock, while 4150 is
  8. Finish: Nickel PVD.
  9. Mark and inspect: Laser-marked and final inspected

Six-groove button rifling is land-and-groove rifling, not polygonal, so it runs jacketed and cast lead bullets.

How We Inspect It

Faxon pistol barrels are built to a written control plan, and each run is logged on inspection sheets. Here is what this barrel goes through before it ships.

Burr checkEvery barrel inspected for burrs under 10x magnification
Hood fitEvery hood run through a go/thru gauge
CMMFirst and last barrel of every run checked on the CMM
First articleFull CMM first-article inspection after any machine maintenance, tool change, or part change, and at least every 30 days
CertificationsMaterial certs checked at receiving; stress relief certified by lot

Spiral Fluted Profile

Spiral flutes wrap the barrel for weight savings, more surface area for cooling, and a bold look.

What’s in the Box

INCLUDED

G19 / G45 / G19X 9mm barrel

416-R stainless, Nickel PVD, 4.47″

INCLUDED

Thread protector

For the 1/2x28 muzzle threads.

NOT INCLUDED

Slide, recoil assembly, compensator

Pair a threaded barrel with a Faxon EXOS® compensator or a 1/2x28 suppressor.

Specifications

Caliber9mm Luger (9x19), SAAMI chamber
FitsGlock® 19 Gen 2–6, Glock® 45, and Glock® 19X slides
Length4.47″
SeriesMatch Series
ProfileSpiral Fluted
Material416-R stainless, heat treated and stress relieved
RiflingButton rifled, 1:10 twist, 6 grooves (land and groove)
InspectionBore and rifling air gauged
FinishNickel PVD
Muzzle1/2x28 threaded, target crown; thread protector included
Made inGreater Cincinnati, Ohio, USA
FFLNot required

What Owners Say

This barrel doesn’t have reviews on FaxonFirearms.com yet. If you own one, tell other shooters how it runs in the review section below.

What Reviewers and Dealer Customers Say

AMMOLAND

Faxon Firearms Glock 19 Threaded Barrel Review ›

Hands-on review of a Faxon Match Series barrel.

“Couple hundred rounds later (lots suppressed, and dirty), no failures to feed or extract.”

AMMOLAND

Flame Fluted Threaded Glock 17 & 19 Barrels Review ›

Hands-on review of a Faxon Match Series barrel.

“I am impressed in the quality of the Faxon barrels.”

“This barrel pairs great with their Faxon exo compensator and looks great as well!!”

rizz, OpticsPlanet review • Read it ›

“Functions well without failure to feed or eject. Barrel shoots accurate and has unique coating”

Darren, OpticsPlanet review • Read it ›

Quotes from third-party reviews and dealer listings; some cover the same barrel in another finish or threaded configuration.

Every Faxon Barrel for the G19 / G45 / G19X

BarrelSteelMuzzleFinishMSRP
Match Series Spiral Fluted (this barrel)416-R stainlessThreadedNickel PVD$133
Duty Series4150 CMVNon-threadedBlack nitride$98
Duty Series4150 CMVThreadedBlack nitride$99
Match Series Flame Fluted®416-R stainlessNon-threadedBlack nitride$120
Match Series Flame Fluted®416-R stainlessNon-threadedChameleon PVD$125
Match Series Flame Fluted®416-R stainlessNon-threadedGold TiN PVD$125
Match Series Flame Fluted®416-R stainlessThreadedBlack nitride$125
Match Series Flame Fluted®416-R stainlessThreadedChameleon PVD$130
Match Series Flame Fluted®416-R stainlessThreadedGold TiN PVD$130

Add a compensator: Faxon EXOS-513 for Gen 3 • Faxon EXOS-543 for Gen 4 • Faxon EXOS-553 for Gen 5. Faxon EXOS® comps thread onto the 1/2x28 muzzle; use the included thread locker on the barrel threads only, not on the set screws.

Match Series G19 / G45 / G19X Barrel FAQs

Is this barrel drop-in?

Yes. It is a direct replacement for the factory barrel in Glock® 19 Gen 2–6, Glock® 45, and Glock® 19X slides with no gunsmithing on factory-spec slides. Some aftermarket slides may need minor fitting.

How is it rifled?

Button rifled, 1:10 twist, with six grooves. Faxon rifles a long blank in-house, air gauges the bore and rifling, and stress relieves it before cutting it into pistol barrels.

Can I shoot cast lead bullets?

Yes. Six-groove button rifling is land-and-groove rifling, not polygonal, so it runs both jacketed and cast lead bullets.

What is the difference between Duty Series and Match Series pistol barrels?

Duty Series barrels are 4150 CMV in an OEM-style profile with salt-bath nitride inside and out. Match Series barrels are 416-R stainless, heat treated for pistol-barrel hardness, and come in fluted profiles and PVD color options.

What finish is it?

Nickel PVD.

Can I run a suppressor or compensator?

Yes. The muzzle is threaded 1/2x28, the common 9mm thread, and a thread protector is included. You will likely need suppressor-height sights to see over a suppressor.

Can it ship to California?

No. Threaded barrels cannot be shipped to California.

Will it fit a Ruger® RXM?

Faxon did not test its G19 barrels with the Ruger® RXM during development. Some customers report running them, but manufacturing tolerances vary, so fit is not guaranteed.

Where is it made?

In Greater Cincinnati, Ohio. Pistol barrels ship without an FFL.

GLOCK® is a federally registered trademark of GLOCK, Inc. and GLOCK Ges.m.b.H. Faxon Firearms is not affiliated with or endorsed by them; model names are for compatibility only. Flame Fluted® and EXOS® are trademarks of Faxon Firearms. Know and follow all federal, state, and local laws.

Warranty

Faxon Lifetime Guarantee. Covers manufacturing and material defects to the original purchaser. Excludes damage from misuse, neglect, non-standard ammunition, or modifications. Register your product at faxonfirearms.com/product-registration to expedite service. For purchases through dealers or distributors, warranty repairs are handled directly by Faxon Firearms; refunds must be processed through the selling entity. Full policy: faxonfirearms.com/warranty-privacy-terms/

Customers Also Shopped These Items