FAXON MATCH SERIES FLAME FLUTED® BARREL FOR G19 / G45 / G19X Gen 2–6 9MM IN CHAMELEON PVD
FaxonDescription
Pistol Barrels › For Glock® › For G19
Fit and Compatibility
This barrel is a direct replacement for the factory barrel in Glock® 19 Gen 2–6, Glock® 45, and Glock® 19X slides. It is machined to tight tolerances for consistent lockup, and it drops into factory-spec slides with no gunsmithing. On some aftermarket slides, minor fitting may be needed.
Gen 6 compatibility: As of Job #16477 (engraved on the non-ejection side of the barrel hood), this barrel includes the Gen 6 relief cut and is compatible with the Glock® 19 Gen 2–6, the Glock® 45 (G45), and the Glock® 19X (G19X). Units made before Job #16477 are Gen 6 compatible, though increased wear in the area of the relief cut is possible.
The Glock® 45 and Glock® 19X are 9mm pistols with a G19-length slide and barrel on a G17-length frame, so they take a Glock® 19 barrel, not a .45 ACP barrel.
Aftermarket slides: there is a known compatibility issue with some Zaffiri Precision slides (ZPS.3v2 and ZPS.6 patterns) because of top-window size and placement.
Finish: Chameleon PVD color concentration varies slightly from barrel to barrel, so no two look exactly alike.
How It’s Made
Every Faxon pistol barrel starts as a long 416-R stainless barrel blank that Faxon rifles in-house before it is ever cut into pistol barrels. That way the whole blank gets the same rifling, inspection, and stress relief, and every barrel cut from it starts from a qualified bore.
- Drill and ream: 416-R stainless bar gun-drilled and reamed as a long blank
- Button rifle: Button rifled 1:10, six grooves
- Air gauge: Bore and rifling air gauged
- Stress relieve: Stress relieved in-house after rifling, just like Faxon rifle barrels
- Cut and qualify: Blank cut to length and qualify-turned true to the bore
- Turn and mill: Hood, lugs, and Flame Fluted® profile turned and milled; 9mm SAAMI chamber and target crown cut
- Heat treat: 416-R heat treated to pistol-barrel hardness; 416-R isn’t hard enough for a pistol barrel as bar stock, while 4150 is
- Finish: Chameleon (rainbow) PVD.
- Mark and inspect: Laser-marked and final inspected
Six-groove button rifling is land-and-groove rifling, not polygonal, so it runs jacketed and cast lead bullets.
How We Inspect It
Faxon pistol barrels are built to a written control plan, and each run is logged on inspection sheets. Here is what this barrel goes through before it ships.
| Burr check | Every barrel inspected for burrs under 10x magnification |
| Hood fit | Every hood run through a go/thru gauge |
| CMM | First and last barrel of every run checked on the CMM |
| First article | Full CMM first-article inspection after any machine maintenance, tool change, or part change, and at least every 30 days |
| Certifications | Material certs checked at receiving; stress relief certified by lot |
Flame Fluted® Profile
Faxon’s patented Flame Fluted® design cuts weight and adds surface area for faster cooling, with the distinctive Faxon look.
What’s in the Box
INCLUDED
G19 / G45 / G19X 9mm barrel
416-R stainless, Chameleon (rainbow) PVD, 4.02″
NOT INCLUDED
Slide, recoil assembly
Uses your factory recoil assembly.
Specifications
| Caliber | 9mm Luger (9x19), SAAMI chamber |
| Fits | Glock® 19 Gen 2–6, Glock® 45, and Glock® 19X slides |
| Length | 4.02″ |
| Series | Match Series |
| Profile | Flame Fluted® |
| Material | 416-R stainless, heat treated and stress relieved |
| Rifling | Button rifled, 1:10 twist, 6 grooves (land and groove) |
| Inspection | Bore and rifling air gauged |
| Finish | Chameleon (rainbow) PVD |
| Muzzle | Non-threaded, target crown |
| Made in | Greater Cincinnati, Ohio, USA |
| FFL | Not required |
What Owners Say
“Quality fluted barrel.”
Edward Johnson, verified buyer
“Finish is beautifully done. Fantastic product and fast shipping to top it off!”
Raymond, verified buyer
“Finish is amazing and pictures do not do it justice Fantastic product in look and function. Highly recommend Faxon”
Bill, verified buyer
Average rating: 5.0 out of 5 stars from 6 reviews on FaxonFirearms.com.
What Reviewers and Dealer Customers Say
“Perfect drop-in fit, great nitride finish.”
Mark, OpticsPlanet review • Read it ›
“This is by far the best aftermarket barrel I have purchased. Perfect fit and finish!”
Jason, OpticsPlanet review • Read it ›
“This barrel fit seamlessly in my Glock 19 gen5 mos. Its a significant upgrade over the OEM barrel.”
Risky Business, OpticsPlanet review • Read it ›
Quotes from third-party reviews and dealer listings; some cover the same barrel in another finish or threaded configuration.
Every Faxon Barrel for the G19 / G45 / G19X
| Barrel | Steel | Muzzle | Finish | MSRP |
|---|---|---|---|---|
| Match Series Flame Fluted® (this barrel) | 416-R stainless | Non-threaded | Chameleon PVD | $125 |
| Duty Series | 4150 CMV | Non-threaded | Black nitride | $98 |
| Duty Series | 4150 CMV | Threaded | Black nitride | $99 |
| Match Series Flame Fluted® | 416-R stainless | Non-threaded | Black nitride | $120 |
| Match Series Flame Fluted® | 416-R stainless | Non-threaded | Gold TiN PVD | $125 |
| Match Series Flame Fluted® | 416-R stainless | Threaded | Black nitride | $125 |
| Match Series Flame Fluted® | 416-R stainless | Threaded | Chameleon PVD | $130 |
| Match Series Spiral Fluted | 416-R stainless | Threaded | Nickel PVD | $133 |
| Match Series Flame Fluted® | 416-R stainless | Threaded | Gold TiN PVD | $130 |
Match Series G19 / G45 / G19X Barrel FAQs
Is this barrel drop-in?
Yes. It is a direct replacement for the factory barrel in Glock® 19 Gen 2–6, Glock® 45, and Glock® 19X slides with no gunsmithing on factory-spec slides. Some aftermarket slides may need minor fitting.
How is it rifled?
Button rifled, 1:10 twist, with six grooves. Faxon rifles a long blank in-house, air gauges the bore and rifling, and stress relieves it before cutting it into pistol barrels.
Can I shoot cast lead bullets?
Yes. Six-groove button rifling is land-and-groove rifling, not polygonal, so it runs both jacketed and cast lead bullets.
What is the difference between Duty Series and Match Series pistol barrels?
Duty Series barrels are 4150 CMV in an OEM-style profile with salt-bath nitride inside and out. Match Series barrels are 416-R stainless, heat treated for pistol-barrel hardness, and come in fluted profiles and PVD color options.
What finish is it?
Chameleon (rainbow) PVD.
Will it fit a Ruger® RXM?
Faxon did not test its G19 barrels with the Ruger® RXM during development. Some customers report running them, but manufacturing tolerances vary, so fit is not guaranteed.
Where is it made?
In Greater Cincinnati, Ohio. Pistol barrels ship without an FFL.
GLOCK® is a federally registered trademark of GLOCK, Inc. and GLOCK Ges.m.b.H. Faxon Firearms is not affiliated with or endorsed by them; model names are for compatibility only. Flame Fluted® and EXOS® are trademarks of Faxon Firearms. Know and follow all federal, state, and local laws.
Warranty
Faxon Lifetime Guarantee. Covers manufacturing and material defects to the original purchaser. Excludes damage from misuse, neglect, non-standard ammunition, or modifications. Register your product at faxonfirearms.com/product-registration to expedite service. For purchases through dealers or distributors, warranty repairs are handled directly by Faxon Firearms; refunds must be processed through the selling entity. Full policy: faxonfirearms.com/warranty-privacy-terms/Customers Also Shopped These Items
Reviews
-
Great product.
Great product. Well constructed and works great
-
G19 Barrel
Fantastic barrel
-
Fantastic Drop in Barrel
Barrel was a drop in fit for my Brownells G19 gen 3 slide. Works fantastic with my 147gr flat point loads at 1.145" Overall Length. Barrel is accurate and looks good too. Would definitely recommend or get again.
-
CHAMELEON PVD FOR G19
Finish is amazing and pictures do not do it justice Fantastic product in look and function. Highly recommend Faxon
-
Barrel G19
Finish is beautifully done. Fantastic product and fast shipping to top it off! Highly recommend giving Faxon some of your business as I can guarantee you will NOT be disappointed at all!
-
g19 barrel
Quality fluted barrel.