Yes. The FX-19-HF-02 is a complete, serialized semi-automatic pistol. It ships with every component needed to fire, including two 15-round magazines, a removable RMR cover plate, a 1/2x28 thread protector pre-installed on the barrel, a federally-required trigger lock, and the operator's manual. You will need to purchase 9mm Luger ammunition separately. All firearm purchases require transfer through a licensed FFL dealer.

Yes. The FX-19 Gen 2 frame is engineered from the ground up for full Glock® 19 Gen 3 holster, parts, and accessory compatibility. Your Glock® 19 Gen 3 duty holster, weapon-mounted lights, aftermarket triggers, sights, magazine releases, slide stops, and other Gen 3 aftermarket parts will work with the FX-19 Hellfire. The pistol also accepts standard Glock® 19 magazines (10-round, 15-round, and extended capacities where legal).

Note: Glock® 19 Gen 4 / Gen 5 specific parts are not guaranteed to fit due to different frame rail and grip module geometry. The FX-19 Gen 2 frame matches Gen 3 dimensions specifically.

All FX-19 Gen 2 pistols share the same compact slide platform and Glock® 19 Gen 3 slide compatibility. The differences are in the frame (compact vs. full-size) and barrel/slide trim level:

• FX-19 Duty (FX-19-D-02) — Compact frame, Duty slide, Faxon Duty Series non-threaded barrel. 10+1 capacity. $850 MSRP. Most accessible price point.
• FX-19 Patriot Gen 2 (FX-19-P-02) — Compact frame, Patriot slide, Match Series non-threaded barrel. 10+1 capacity. $999 MSRP.
• FX-19 Hellfire Gen 2 (FX-19-HF-02) — This pistol. Compact frame, Hellfire slide, Match Series flame-fluted threaded barrel. 15+1 capacity. $1,050 MSRP. Most concealable suppressor-ready build.
• FX-19X Patriot (FX-19X-P-02) — Full-size frame, compact Patriot slide, Match Series non-threaded barrel. 17+1 capacity.
• FX-19X Hellfire (FX-19X-HF-02) — Full-size frame, compact Hellfire slide, Match Series flame-fluted threaded barrel. 17+1 capacity. $1,075 MSRP. Flagship of the lineup.

Yes — the FX-19 Hellfire ships with a 1/2x28 threaded Match Series barrel, the standard thread pitch for 9mm pistols. It's a direct host for most 9mm suppressors and the full Faxon EXOS® pistol compensator line out of the box — no muzzle device swap or thread adapter required.

The barrel ships with a 1/2x28 thread protector pre-installed. Remove the protector to mount your suppressor or compensator. Important: when running a suppressor on a Glock-pattern pistol, the optic and slide-stop spring may require tuning — review our Shooting Suppressed guide before your first range trip.

The Hellfire slide is factory-cut for the Trijicon RMR® footprint, which is one of the most widely supported optic patterns on the market. Compatible optics include the Trijicon RMR / RMRcc, Holosun 507C / 508T / 407C, and any other red dot using the standard RMR footprint.

The slide ships with a removable cover plate installed — just remove the cover plate screws, lift it off, and install your optic. Use the Night Fision® Optics-Ready Stealth Series rear sight for lower 1/3 co-witness with any RMR-footprint optic.

Important: Some mounting screws supplied with RMR-footprint optics may be too long and impinge on the extractor spring rod. Verify the extractor moves freely after installing your optic and use shorter screws or a thin shim if needed.

The FX-19 Hellfire ships with the Faxon Match Series Flame-Fluted Threaded Barrel for G19 Gen 2-5 9mm in 1/2x28 threaded configuration — the same Match Series barrel we sell as a drop-in upgrade for stock Glock® 19 Gen 3 pistols. It's machined in-house in Cincinnati, Ohio from 416-R stainless steel (the premium match-grade stainless used in high-end precision rifle barrels) and finished with a durable QPQ nitride treatment inside and out for additional hardness, wear resistance, and long service life.

Compared to our Duty Series barrel (used in the FX-19 Duty), the Match Series adds tighter tolerances for improved accuracy and flame fluting for weight reduction and improved heat dissipation. Compared to a factory polygonal-rifled Glock® barrel, the Faxon Match Series barrel uses conventional rifling, which is generally regarded as more forgiving with lead and reloaded ammunition.

Both pistols use the same Match Series flame-fluted threaded barrel and aggressive Hellfire slide — the difference is in the frame:

• FX-19 Hellfire (this pistol) — Compact frame, 15+1 capacity, $1,050 MSRP. Smaller carry footprint, full Glock® 19 Gen 3 holster compatibility, accepts G19 magazines.
• FX-19X Hellfire — Full-size frame, 17+1 capacity, $1,075 MSRP. Larger grip for better recoil control and higher capacity, accepts G17 magazines, fits G19X / G45-style holsters.

Pick the FX-19 Hellfire if concealability and G19 holster compatibility are priorities. Pick the FX-19X Hellfire if you want maximum capacity and the full-size frame ergonomics for duty or competition use.

FX-19 pistols cannot be shipped to CA, CT, DC, HI, IL, MD, MA, NJ, or NY. Shipments must go overnight to a licensed FFL dealer in your state. Verify your state and local handgun regulations before ordering. Faxon Firearms is not responsible for compliance with local handgun ordinances at the buyer's location.

The FX-19 Hellfire is designed, manufactured, and assembled by Faxon Firearms in Greater Cincinnati, Ohio. Faxon has operated as a precision machining company since 1978 and has been producing complete firearms since 2012. The frame, slide, barrel, and other Faxon-branded components are all made or assembled in-house. Partner components — the Night Fision® sights — are sourced from their original manufacturer, not aftermarket substitutes.

Every FX-19 Hellfire is covered by the Faxon Lifetime Guarantee.