FAXON MATCH SERIES 16" 6.5 GRENDEL GUNNER COMPLETE UPPER
FaxonDescription
AR15 Upper Receivers › Complete Uppers › Match Series 16″ 6.5 Grendel
What’s on This Upper
Every major part is a Faxon part that is also sold on its own; each card links to its product page, specs, and reviews.
BARREL
Match Series 16″ Gunner 6.5 Grendel barrel ›
416-R Stainless, QPQ Nitride, 1:8 twist, mid-length gas, 5/8x24 muzzle. Every barrel is borescoped, bore and groove air gauged, headspace gauged with GO/NO-GO gauges, and 100% wet magnetic particle inspected before it ships.
UPPER RECEIVER
7075-T6 forging, Type III hard coat, forward assist and ejection port cover installed. Trued by Faxon, bore honed, tighter lug tolerance, engraved T-marks, skeletonized shell deflector.
HANDGUARD
Streamline aluminum M-LOK 15″ handguard ›
6061 aluminum, hard coat anodized, M-LOK slots on all 8 surfaces, free-floated.
GAS BLOCK
Faxon fixed .750" low-profile gas block ›
4140 chromoly, 3 set screws, nitrided. The bore is toleranced to run slightly large, never small, so it seats and seals.
GAS TUBE
Mid-Length stainless gas tube ›
Faxon’s gas tubes are made from 304 seamless stainless steel tubing.
BOLT CARRIER GROUP
Superfinished 6.5 Grendel / 6mm ARC Type 2 BCG, nitride ›
Type 2 Grendel/ARC bolt, superfinished and nitrided, MPI inspected.
CHARGING HANDLE
Faxon Edition BREEK® Sledgehammer charging handle ›
Ambidextrous and gas-blocking, built for rifles that run suppressed.
Not included: lower receiver, optic.
Barreled, Complete, or Suppressor Ready?
Faxon builds each upper in up to four configurations. A barreled upper has the receiver, barrel, gas system, handguard, and muzzle device installed, with no bolt carrier group or charging handle. A complete upper adds both, so it is ready to pin to a lower. Suppressor ready versions swap in a MuzzLok® Plan B compatible flash hider and, on gas guns, Faxon’s patented adjustable gas block, so a suppressor mounts with one adapter and the gas can be tuned to it. This one is the complete upper.
What a 6.5 Grendel Upper Needs
| Fires | 6.5 Grendel |
| Bolt | Type 2 6.5 Grendel / 6mm ARC bolt (included) |
| Magazines | 6.5 Grendel / 6mm ARC magazines |
| Lower | Any mil-spec AR-15 lower receiver |
| Buffer | Standard AR-15 carbine buffer system |
This is a 6.5 Grendel Type II chamber. It needs a Type 2 Grendel/ARC bolt and Grendel-pattern magazines; the 1:8 twist stabilizes the long, high-BC 6.5mm bullets that make the cartridge work at distance.
Want to Run a Suppressor Later?
The muzzle is threaded 5/8x24, so a direct-thread HUB adapter or any .30 cal muzzle-device mount works. For a suppressor that runs on and off the rifle, Faxon recommends adding a patented adjustable gas block to tune for the extra back-pressure. Or skip the parts list: the suppressor-ready version of this upper comes with both.
How It’s Built and Inspected
| Barrel | 416-R stainless barrel, 5R button rifled; Stress relieved, then profiled true to the bore; Salt-bath QPQ nitride inside and out; NP3 nickel-Teflon barrel extension torqued to 150 ft-lb |
| Barrel inspection | Borescoped after reaming, rifling, and chambering; bore and groove air gauged; chamber checked on a CMM program first and last of every run; muzzle threads gauged; headspace gauged; 100% wet MPI |
| Upper receiver | 7075-T6 forging, Type III hard coat. Barrel threads gauged on every receiver, CMM checked every shift. Trued by Faxon, bore honed, tighter lug tolerance, engraved T-marks, skeletonized shell deflector. |
| Assembly | Assembled, inspected, and packed by Faxon in Greater Cincinnati, Ohio |
| Process control | Full CMM first-article inspection after any machine maintenance, tool change, or part change, and at least every 30 days; material certs checked at receiving; stress relief and nitride certified by lot |
Finish the Rifle
This upper pins to any mil-spec AR-15 lower. Faxon makes three, all from 7075-T6 forgings with an upper-to-lower tensioning screw to take out receiver play. The lower is the serialized part, so it ships to an FFL; the upper doesn’t.
BUILD YOUR WAY
Forged Lower with Completion Kit ›
Pins, springs, fire control, grip, and a B5 trigger guard. $170
Specifications
| Caliber / chamber | 6.5 Grendel |
| Barrel | Match Series 16″ Gunner, 416-R Stainless, QPQ Nitride |
| Twist | 1:8, 5R button rifled |
| Gas system | Mid-length; mid-length 304 stainless tube |
| Gas block | Fixed .750" low-profile gas block, 3 set screws |
| Muzzle | 5/8x24; MuzzLok® ported 7.62 flash hider, 5/8x24, steel, nitride |
| Handguard | 15″ Streamline aluminum, M-LOK on all 8 surfaces, free-float |
| Bolt carrier group | Superfinished 6.5 Grendel / 6mm ARC Type 2 BCG, nitride |
| Charging handle | Faxon Edition BREEK® Sledgehammer charging handle |
| Upper receiver | Enhanced Forged AR-15 upper, 7075-T6, Type III hard coat, forward assist and port cover |
| Assembled in | Greater Cincinnati, Ohio, USA |
| Warranty | Faxon Lifetime Guarantee |
Fitment
| Lower receiver | Any mil-spec AR-15 lower |
| Magazines | 6.5 Grendel / 6mm ARC magazines |
| Bolt | Type 2 6.5 Grendel / 6mm ARC bolt |
| Suppressor | Direct-thread or muzzle-device mount on the 5/8x24 thread |
| Optics | Flat-top Picatinny upper; M-LOK handguard for lights and lasers |
| FFL | Not required for the upper; state and local laws apply |
What Reviewers and Owners Say About These Parts
This upper is new, so it has few reviews of its own yet. Every major part on it is sold on its own, so here is what independent reviewers and Faxon customers have said about the barrel, carrier, handguard, gas block, and receiver.
OPTICSPLANET
Faxon Forged Upper Receiver Reviews ›
Verified buyer on Faxon’s forged 7075-T6 upper.
“The quality and craftsmanship is exceptional.”
PEW PEW TACTICAL
Review of Faxon’s earlier Ascent rifles, built on Faxon barrels.
“Both guns ran great! They fed, fired, and ejected as intended with no issues.”
“Shot groups of 3 at 50,100,150 and all were .75 and less.”
George Swarts, 16″ Gunner 6.5 Grendel barrel, FaxonFirearms.com
“Faxon Firearms delivers quality 5R barrels for a reasonable price.”
Veteran Tactical Hunter, 16″ Gunner 6.5 Grendel barrel, FaxonFirearms.com
“I’ve built several 6.5 Grendels and this Faxon type 2 BCG has to be the best i’ve used to date, works perfectly!”
Aaron Sholar, BCG, FaxonFirearms.com
“Ultra lightweight, without giving up rigidity. Plenty of M-Lok.”
Daniel S., 15″ aluminum handguard, FaxonFirearms.com
“No worries with this gas block. It works right every time and all the time.”
verified buyer, gas block, FaxonFirearms.com
“considering it is factory trued, makes a good investment.”
Tom, upper receiver, FaxonFirearms.com
Average ratings on FaxonFirearms.com, out of 5 stars: 16″ Gunner 6.5 Grendel barrel: 5.0; BCG: 5.0; handguard: 4.8; gas block: 4.7; upper receiver: 4.9; muzzle device: 5.0.
Compare the Match Series 16″ 6.5 Grendel Uppers
| Upper | BCG + charging handle | Muzzle | Gas block | MSRP |
|---|---|---|---|---|
| Barreled | Not included | MuzzLok® ported 7.62 flash hider | Fixed | $599 |
| Barreled, suppressor ready | Not included | MuzzLok® Plan B compatible flash hider | Adjustable | $660 |
| Complete (this upper) | Included | MuzzLok® ported 7.62 flash hider | Fixed | $875 |
| Complete, suppressor ready | Included | MuzzLok® Plan B compatible flash hider | Adjustable | $937 |
Match Series 16″ 6.5 Grendel Complete Upper FAQs
What comes on this upper, and what doesn’t?
Included: Enhanced Forged AR-15 upper, 16″ Match Series Gunner 6.5 Grendel barrel, 15″ Streamline aluminum M-LOK handguard, fixed .750" low-profile gas block, mid-length stainless gas tube, MuzzLok® ported 7.62 flash hider, Superfinished 6.5 Grendel / 6mm ARC Type 2 BCG, nitride, Faxon Edition BREEK® Sledgehammer charging handle. Not included: lower receiver, optic.
What’s the difference between a barreled upper and a complete upper?
A barreled upper has the receiver, barrel, gas system, handguard, and muzzle device installed but no bolt carrier group or charging handle. A complete upper includes both and is ready to pin to a lower. Suppressor-ready versions add a MuzzLok® Plan B compatible flash hider and Faxon’s patented adjustable gas block.
Will this upper fit my lower?
Yes, if it’s a mil-spec AR-15 lower. Mil-spec uppers and lowers share the same pin locations and dimensions. Billet receivers from different makers can fit tighter or looser; Faxon lowers include a tensioning screw to take out play. AR-10, AR-9, and dedicated-lower systems aren’t interchangeable with AR-15 uppers.
Do I need to check headspace?
Every Faxon barrel is headspace gauged with GO/NO-GO gauges when the extension goes on, and the BCG installed is the one this upper ships with. Checking headspace with GO/NO-GO gauges for the bolt you run is always good practice, and it’s a must any time you swap in a different bolt.
What bolt and magazines does a 6.5 Grendel upper use?
Bolt: Type 2 6.5 Grendel / 6mm ARC bolt (installed). Magazines: 6.5 Grendel / 6mm ARC magazines.
What ammunition does it shoot?
6.5 Grendel. Grendel loads from 100 to 130 gr cover most hunting and target use.
Can I run a suppressor on it?
Yes. The muzzle is threaded 5/8x24, so a direct-thread HUB adapter or a muzzle-device mount works. For a can that comes on and off, an adjustable gas block makes the rifle run softer suppressed.
What makes a good AR-15 upper, and how does this one compare?
Start with the barrel: steel, rifling, finish, and inspection. This one is 416-R Stainless, 5R button rifled, QPQ nitrided, borescoped, air gauged, headspace gauged, and 100% MPI inspected. Then a forged 7075-T6 receiver, a gas system matched to the barrel length (mid-length here), a free-float M-LOK handguard, and, on a complete upper, a quality BCG. Faxon makes the barrel, receiver, gas block, and muzzle device, and assembles the upper in Ohio under a Lifetime Guarantee.
Nitride or chrome lining: which is better?
Chrome lining still has its place, mainly sustained automatic fire. For the vast majority of shooters, Faxon’s salt-bath QPQ nitride does what they need and more: it hardens the bore and exterior, resists corrosion, adds virtually nothing to the dimensions (a few ten-thousandths of an inch, about a tenth the width of a human hair), and needs little to no break-in.
Does the upper ship to an FFL?
No. The upper isn’t the serialized part of an AR-15, so it doesn’t require an FFL. Faxon lowers do. State and local laws on barrel length, threaded barrels, and muzzle devices still apply.
Where is it made, and what is the warranty?
Faxon makes the barrel, receiver, gas block, and MuzzLok® devices in Greater Cincinnati, Ohio, and assembles the upper there. It’s covered by the Faxon Lifetime Guarantee.
MuzzLok®, HARMONIX®, CORESYNC®, and Integral® are trademarks of Faxon Firearms. BREEK® is a trademark of its owner. Glock® and Colt® are trademarks of their owners; Faxon is not affiliated with them. “Plan B” is a trademark of Q, LLC; Faxon Firearms is not affiliated with, endorsed by, or sponsored by Q, LLC. Firearm, suppressor, and barrel-length laws vary by state and locality; know and follow the laws where you live.