For G19

Faxon Barrels for Glock® 19

9 drop-in 9mm barrels for Glock® 19 Gen 2–6, Glock® 45, and Glock® 19X slides: 2 Duty Series ($98–$99) and 7 Match Series ($120–$133), threaded and non-threaded, made in Greater Cincinnati, Ohio. Every Faxon pistol barrel starts as a long blank that Faxon button rifles 1:10 with six grooves (land and groove, not polygonal, so cast lead is fine), air gauges, and stress relieves in-house, then qualify-turns and mills into a barrel that drops into a factory-spec slide with no gunsmithing. Every barrel is checked for burrs under 10x magnification and its hood is run through a go/thru gauge. Duty Series barrels are 4150 CMV with salt-bath QPQ nitride inside and out. Match Series barrels are 416-R stainless, heat treated for pistol-barrel hardness, with Faxon fluting and black nitride or PVD finishes (TiN, Chameleon, Nickel). Threaded barrels are 1/2x28 and include a thread protector; threaded barrels can’t ship to California. Owners rate them 4.9 out of 5 stars across 83 reviews on FaxonFirearms.com.

DUTY • NON-THREADED

Duty Series Standard ›

$98 • 4150 CMV

DUTY • THREADED

Duty Series Threaded ›

$99 • 5.0 ★ (18) • 4150 CMV

MATCH • NON-THREADED

Flame Fluted®, Black nitride ›

$120 • 5.0 ★ (16) • 416-R stainless

MATCH • NON-THREADED

Flame Fluted®, Chameleon PVD ›

$125 • 5.0 ★ (6) • 416-R stainless

MATCH • NON-THREADED

Flame Fluted®, Gold TiN PVD ›

$125 • 416-R stainless

MATCH • THREADED

Flame Fluted®, Black nitride ›

$125 • 4.8 ★ (24) • 416-R stainless

MATCH • THREADED

Flame Fluted®, Chameleon PVD ›

$130 • 4.9 ★ (10) • 416-R stainless

MATCH • THREADED

Spiral Fluted, Nickel PVD ›

$133 • 416-R stainless

MATCH • THREADED

Flame Fluted®, Gold TiN PVD ›

$130 • 5.0 ★ (9) • 416-R stainless

Fit notes: Glock® Gen 6: barrels from Job #16477 on (engraved on the non-ejection side of the hood) include the Gen 6 relief cut and fit the Glock® 19 Gen 2–6, the Glock® 45 (G45), and the Glock® 19X (G19X). The G45 and G19X take a G19 barrel: they’re 9mm pistols with a G19-length slide on a G17-length frame. Faxon didn’t test its G19 barrels with the Ruger® RXM in development; some customers run them, but tolerances vary. Running a threaded barrel? Add a Faxon EXOS® compensator: EXOS-513 for Gen 3, EXOS-543 for Gen 4, EXOS-553 for Gen 5.

There are no products listed under this category.

Duty Series or Match Series for Your G19?

Duty SeriesMatch Series
Barrels27
Steel4150 CMV416-R stainless, heat treated for pistol-barrel hardness
RiflingButton rifled 1:10, six grooves, air gaugedButton rifled 1:10, six grooves, air gauged
ProfileOEM-styleFlame Fluted®, Spiral Fluted
FinishSalt-bath nitrideBlack nitride, Chameleon PVD, Gold TiN PVD, Nickel PVD
Threaded optionsYes, 1/2x28Yes, 1/2x28
MSRP$98–$99$120–$133

Both lines share the same bore and the same drop-in fit for Glock® 19 Gen 2–6, Glock® 45, and Glock® 19X slides. Pick Duty Series for a hard-wearing, OEM-style replacement at the lowest price; pick Match Series for 416-R stainless with Faxon fluting and a choice of finishes.

Every Faxon G19 Barrel, Spec by Spec

BarrelSeriesProfileFinishMuzzleMSRP
Duty Series non-threaded, Salt-bath nitride
GA910N19NGQ-N
DutyOEM-styleSalt-bath nitrideNon-threaded$98
Duty Series threaded, Salt-bath nitride
GA910N19NGQ-T
DutyOEM-styleSalt-bath nitride1/2x28, protector included$99
Match Flame Fluted® non-threaded, Black nitride
GB910N19LGQ-N
MatchFlame Fluted®Black nitrideNon-threaded$120
Match Flame Fluted® threaded, Black nitride
GB910N19LGQ-T
MatchFlame Fluted®Black nitride1/2x28, protector included$125
Match Flame Fluted® non-threaded, Chameleon PVD
GB910N19LGQ-N-NCR
MatchFlame Fluted®Chameleon PVDNon-threaded$125
Match Flame Fluted® non-threaded, Gold TiN PVD
GB910N19LGQ-N-TiN
MatchFlame Fluted®Gold TiN PVDNon-threaded$125
Match Flame Fluted® threaded, Gold TiN PVD
GB910N19LGQ-T-TiN
MatchFlame Fluted®Gold TiN PVD1/2x28, protector included$130
Match Flame Fluted® threaded, Chameleon PVD
GB910N19LGQ-T-NCR
MatchFlame Fluted®Chameleon PVD1/2x28, protector included$130
Match Spiral Fluted threaded, Nickel PVD
GB910N19HGQ-T-NI
MatchSpiral FlutedNickel PVD1/2x28, protector included$133

All G19 barrels are 9mm, 1:10 twist, six-groove button rifled, with a SAAMI 9mm chamber and target crown.

Threaded Barrels, Comps, and Suppressors

Every threaded Faxon G19 barrel is cut 1/2x28, the common 9mm thread, and ships with a thread protector. Faxon EXOS® compensators are built for each slide: EXOS-513 for Glock® Gen 3, EXOS-543 for Glock® Gen 4, EXOS-553 for Glock® Gen 5. Thread locker comes with the comp; use it on the barrel’s muzzle threads only, not on the set screws. Running a suppressor usually calls for suppressor-height sights. Threaded barrels cannot be shipped to California.

How Faxon Pistol Barrels Are Made

  1. Bar stock gun-drilled and reamed as a long blank
  2. Button rifled 1:10 with six grooves
  3. Bore and rifling air gauged
  4. Stress relieved in-house after rifling, just like Faxon rifle barrels
  5. Blank cut to length and qualify-turned true to the bore
  6. Hood, lugs, profile, SAAMI 9mm chamber, and target crown turned and milled; threaded barrels cut 1/2x28
  7. 416-R Match Series barrels heat treated to pistol-barrel hardness
  8. Salt-bath QPQ nitride or PVD finish
  9. Every barrel checked for burrs under 10x magnification and its hood run through a go/thru gauge
  10. Laser-marked and final inspected

G19 Barrel FAQs

Will a Faxon G19 barrel fit my Gen 5 or Gen 6?

Yes. Faxon G19 barrels fit the Glock® 19 Gen 2–6. Barrels from Job #16477 on, engraved on the non-ejection side of the hood, include the Gen 6 relief cut.

Does a G19 barrel fit the Glock 45 and 19X?

Yes. The G45 and G19X are 9mm pistols with a G19-length slide on a G17-length frame, so they take a G19 barrel.

Will it fit a Ruger RXM?

Faxon didn’t test its G19 barrels with the Ruger® RXM in development. Some customers run them, but manufacturing tolerances vary.

Are Faxon pistol barrels drop-in?

Yes. They are direct replacements for the factory barrel in factory-spec slides, with no gunsmithing. Some aftermarket slides may need minor fitting; check each product page for compatibility notes.

Can I shoot cast lead?

Yes. Six-groove button rifling is land-and-groove rifling, not polygonal, so Faxon pistol barrels run jacketed and cast lead bullets.

What is the difference between Duty Series and Match Series?

Duty Series barrels are 4150 CMV in an OEM-style profile with salt-bath nitride inside and out. Match Series barrels are 416-R stainless, heat treated for pistol-barrel hardness, and come in fluted profiles with nitride or PVD finishes.

Do threaded barrels include a thread protector?

Yes. Every threaded Faxon pistol barrel is cut 1/2x28 and ships with a thread protector. Threaded barrels cannot be shipped to California.

Do I need an FFL?

No. Pistol barrels ship directly to you.

Where are Faxon pistol barrels made?

In Greater Cincinnati, Ohio.

GLOCK® is a federally registered trademark of GLOCK, Inc. and GLOCK Ges.m.b.H. Faxon Firearms is not affiliated with or endorsed by them; model names are for compatibility only. Flame Fluted® and EXOS® are trademarks of Faxon Firearms.