FAXON MATCH SERIES 16" 6MM ARC GUNNER BARRELED UPPER - SUPPRESSOR READY
FaxonDescription
AR15 Upper Receivers › Barreled Uppers, Suppressor Ready › Match Series 16″ 6mm ARC
What’s on This Upper
Every major part is a Faxon part that is also sold on its own; each card links to its product page, specs, and reviews.
BARREL
Match Series 16″ Gunner 6mm ARC barrel ›
416-R Stainless, QPQ Nitride, 1:7.5 twist, mid-length gas, 5/8x24 muzzle. Every barrel is borescoped, bore and groove air gauged, headspace gauged with GO/NO-GO gauges, and 100% wet magnetic particle inspected before it ships.
UPPER RECEIVER
7075-T6 forging, Type III hard coat, forward assist and ejection port cover installed. Trued by Faxon, bore honed, tighter lug tolerance, engraved T-marks, skeletonized shell deflector.
HANDGUARD
Streamline aluminum M-LOK 15″ handguard ›
6061 aluminum, hard coat anodized, M-LOK slots on all 8 surfaces, free-floated.
GAS BLOCK
Faxon patented adjustable .750" low-profile gas block ›
14 detented settings; the adjustment moves the gas tube, so the screw never sits in carbon. 4140, flash nitride, 3 set screws.
GAS TUBE
Mid-Length stainless gas tube ›
Faxon’s gas tubes are made from 304 seamless stainless steel tubing.
MUZZLE DEVICE
MuzzLok® Plan B compatible flash hider ›
5/8x24, .375″ bore. Left-hand MuzzLok® timing nut: timed without crush washers or shims, and ready for a Plan B to HUB adapter.
Not included: lower receiver, bolt carrier group, charging handle, suppressor, Plan B to HUB adapter, optic.
Barreled, Complete, or Suppressor Ready?
Faxon builds each upper in up to four configurations. A barreled upper has the receiver, barrel, gas system, handguard, and muzzle device installed, with no bolt carrier group or charging handle. A complete upper adds both, so it is ready to pin to a lower. Suppressor ready versions swap in a MuzzLok® Plan B compatible flash hider and, on gas guns, Faxon’s patented adjustable gas block, so a suppressor mounts with one adapter and the gas can be tuned to it. This one is the barreled upper, suppressor ready.
What a 6mm ARC Upper Needs
| Fires | 6mm ARC |
| Bolt | Type 2 6.5 Grendel / 6mm ARC bolt (not included) |
| Magazines | 6.5 Grendel / 6mm ARC magazines |
| Lower | Any mil-spec AR-15 lower receiver |
| Buffer | Standard AR-15 carbine buffer system; tune the adjustable gas block to it |
Hornady designed 6mm ARC for long-range performance from AR-15 magazines; Faxon was one of the first barrel makers to chamber it. It needs a Type 2 Grendel/ARC bolt and Grendel-pattern magazines, and the 1:7.5 twist is set for heavy, high-BC 6mm bullets.
Suppressor Ready, Explained
1. MOUNT
Thread a Plan B to HUB adapter (titanium, $95 or stainless, $65; extended versions too) onto the MuzzLok® flash hider. It converts the Plan B interface to the 1.375x24 HUB thread.
2. SUPPRESSOR
Thread on a .30 cal HUB-mount can. Faxon’s: HARMONIX® ION .30 (titanium, the lightweight pick), HARMONIX® Sentry .30 (Haynes 282, built for heat), CORESYNC® .30 (removable core).
3. TUNE
Start with the gas block fully open and confirm it runs. Close it one click at a time, a few rounds per click, until the bolt stops locking back on an empty magazine, then open it one or two clicks. Note the count.
4. RUN IT BOTH WAYS
Count back to your unsuppressed setting when the can comes off. The detents hold the setting under recoil.
Adjust with the rifle unloaded and the block cool. Suppressor purchase requirements are listed on each suppressor’s page; federal, state, and local laws apply.
How It’s Built and Inspected
| Barrel | 416-R stainless barrel, 5R button rifled; Stress relieved, then profiled true to the bore; Salt-bath QPQ nitride inside and out; NP3 nickel-Teflon barrel extension torqued to 150 ft-lb |
| Barrel inspection | Borescoped after reaming, rifling, and chambering; bore and groove air gauged; chamber checked on a CMM program first and last of every run; muzzle threads gauged; headspace gauged; 100% wet MPI |
| Upper receiver | 7075-T6 forging, Type III hard coat. Barrel threads gauged on every receiver, CMM checked every shift. Trued by Faxon, bore honed, tighter lug tolerance, engraved T-marks, skeletonized shell deflector. |
| Assembly | Assembled, inspected, and packed by Faxon in Greater Cincinnati, Ohio |
| Process control | Full CMM first-article inspection after any machine maintenance, tool change, or part change, and at least every 30 days; material certs checked at receiving; stress relief and nitride certified by lot |
Finish the Rifle
This upper pins to any mil-spec AR-15 lower. Faxon makes three, all from 7075-T6 forgings with an upper-to-lower tensioning screw to take out receiver play. The lower is the serialized part, so it ships to an FFL; the upper doesn’t.
BUILD YOUR WAY
Forged Lower with Completion Kit ›
Pins, springs, fire control, grip, and a B5 trigger guard. $170
Need a BCG? The matched Faxon carrier for this caliber is the 6.5 Grendel / 6mm ARC Type 2 BCG, or the Gunner Lightweight Type 2 BCG with the adjustable gas block. Add a charging handle like the Faxon Edition BREEK® Sledgehammer.
Specifications
| Caliber / chamber | 6mm ARC |
| Barrel | Match Series 16″ Gunner, 416-R Stainless, QPQ Nitride |
| Twist | 1:7.5, 5R button rifled |
| Gas system | Mid-length; mid-length 304 stainless tube |
| Gas block | Patented adjustable .750" low-profile gas block, 3 set screws, 14 settings |
| Muzzle | 5/8x24; MuzzLok® Plan B compatible flash hider, 5/8x24, .375″ bore |
| Handguard | 15″ Streamline aluminum, M-LOK on all 8 surfaces, free-float |
| BCG / charging handle | Not included |
| Upper receiver | Enhanced Forged AR-15 upper, 7075-T6, Type III hard coat, forward assist and port cover |
| Assembled in | Greater Cincinnati, Ohio, USA |
| Warranty | Faxon Lifetime Guarantee |
Fitment
| Lower receiver | Any mil-spec AR-15 lower |
| Magazines | 6.5 Grendel / 6mm ARC magazines |
| Bolt | Type 2 6.5 Grendel / 6mm ARC bolt |
| Suppressor | .30 cal HUB-mount can via a Plan B to HUB adapter |
| Optics | Flat-top Picatinny upper; M-LOK handguard for lights and lasers |
| FFL | Not required for the upper; state and local laws apply |
What Reviewers and Owners Say About These Parts
This upper is new, so it has few reviews of its own yet. Every major part on it is sold on its own, so here is what independent reviewers and Faxon customers have said about the barrel, carrier, handguard, gas block, and receiver.
SHOOTING ILLUSTRATED
First Look: Faxon ADJ Gas Block ›
Launch coverage of the adjustable gas block used on Faxon suppressor-ready uppers.
“Faxon’s new design stands out with a uniquely positioned gas-adjustment screw.”
OPTICSPLANET
Faxon Forged Upper Receiver Reviews ›
Verified buyer on Faxon’s forged 7075-T6 upper.
“The quality and craftsmanship is exceptional.”
PEW PEW TACTICAL
Review of Faxon’s earlier Ascent rifles, built on Faxon barrels.
“Both guns ran great! They fed, fired, and ejected as intended with no issues.”
“Ultra lightweight, without giving up rigidity. Plenty of M-Lok.”
Daniel S., 15″ aluminum handguard, FaxonFirearms.com
“No worries about carbon lock with this design, and very easy to maintain the setting you want.”
Pat, gas block, FaxonFirearms.com
“considering it is factory trued, makes a good investment.”
Tom, upper receiver, FaxonFirearms.com
“The tube fits perfectly and works like a charm!”
Art Sauer, gas tube, FaxonFirearms.com
Average ratings on FaxonFirearms.com, out of 5 stars: 16″ Gunner 6mm ARC barrel: 5.0; handguard: 4.8; gas block: 4.9; upper receiver: 4.9.
Compare the Match Series 16″ 6mm ARC Uppers
| Upper | BCG + charging handle | Muzzle | Gas block | MSRP |
|---|---|---|---|---|
| Barreled | Not included | MuzzLok® ported 7.62 flash hider | Fixed | $599 |
| Barreled, suppressor ready (this upper) | Not included | MuzzLok® Plan B compatible flash hider | Adjustable | $660 |
| Complete | Included | MuzzLok® ported 7.62 flash hider | Fixed | $875 |
| Complete, suppressor ready | Included | MuzzLok® Plan B compatible flash hider | Adjustable | $937 |
Match Series 16″ 6mm ARC Barreled Upper, Suppressor Ready FAQs
What comes on this upper, and what doesn’t?
Included: Enhanced Forged AR-15 upper, 16″ Match Series Gunner 6mm ARC barrel, 15″ Streamline aluminum M-LOK handguard, patented adjustable .750" low-profile gas block, mid-length stainless gas tube, MuzzLok® Plan B compatible flash hider. Not included: lower receiver, bolt carrier group, charging handle, suppressor, Plan B to HUB adapter, optic.
What’s the difference between a barreled upper and a complete upper?
A barreled upper has the receiver, barrel, gas system, handguard, and muzzle device installed but no bolt carrier group or charging handle. A complete upper includes both and is ready to pin to a lower. Suppressor-ready versions add a MuzzLok® Plan B compatible flash hider and Faxon’s patented adjustable gas block.
Will this upper fit my lower?
Yes, if it’s a mil-spec AR-15 lower. Mil-spec uppers and lowers share the same pin locations and dimensions. Billet receivers from different makers can fit tighter or looser; Faxon lowers include a tensioning screw to take out play. AR-10, AR-9, and dedicated-lower systems aren’t interchangeable with AR-15 uppers.
Do I need to check headspace?
Every Faxon barrel is headspace gauged with GO/NO-GO gauges when the extension goes on. Checking headspace with GO/NO-GO gauges for the bolt you run is always good practice, and it’s a must any time you swap in a different bolt.
What bolt and magazines does a 6mm ARC upper use?
Bolt: Type 2 6.5 Grendel / 6mm ARC bolt. Magazines: 6.5 Grendel / 6mm ARC magazines.
What ammunition does it shoot?
6mm ARC. Hornady’s factory loads, from varmint to the 103 and 108 gr ELD loads, are a good place to start.
How do I tune the adjustable gas block?
With the rifle unloaded and the block cool, start fully open and confirm it runs. Close it one click at a time, firing a few rounds per click, until the bolt stops locking back on an empty magazine, then open it one or two clicks. Note the count and retune when you add or remove the suppressor or change to a very different load. It takes a 3/32″ hex key or a flat screwdriver.
What do I need to mount a suppressor?
A Plan B to HUB adapter (titanium $95 or stainless $65, standard or extended) and a .30 cal HUB-mount suppressor, such as Faxon’s HARMONIX® ION .30 or HARMONIX® Sentry .30.
What makes a good AR-15 upper, and how does this one compare?
Start with the barrel: steel, rifling, finish, and inspection. This one is 416-R Stainless, 5R button rifled, QPQ nitrided, borescoped, air gauged, headspace gauged, and 100% MPI inspected. Then a forged 7075-T6 receiver, a gas system matched to the barrel length (mid-length here), a free-float M-LOK handguard, and, on a complete upper, a quality BCG. Faxon makes the barrel, receiver, gas block, and muzzle device, and assembles the upper in Ohio under a Lifetime Guarantee.
Nitride or chrome lining: which is better?
Chrome lining still has its place, mainly sustained automatic fire. For the vast majority of shooters, Faxon’s salt-bath QPQ nitride does what they need and more: it hardens the bore and exterior, resists corrosion, adds virtually nothing to the dimensions (a few ten-thousandths of an inch, about a tenth the width of a human hair), and needs little to no break-in.
Does the upper ship to an FFL?
No. The upper isn’t the serialized part of an AR-15, so it doesn’t require an FFL. Faxon lowers do. State and local laws on barrel length, threaded barrels, and muzzle devices still apply.
Where is it made, and what is the warranty?
Faxon makes the barrel, receiver, gas block, and MuzzLok® devices in Greater Cincinnati, Ohio, and assembles the upper there. It’s covered by the Faxon Lifetime Guarantee.
Build the rest of the rifle
Pin it to a lower, mount a can, and go shoot.
MuzzLok®, HARMONIX®, CORESYNC®, and Integral® are trademarks of Faxon Firearms. BREEK® is a trademark of its owner. Glock® and Colt® are trademarks of their owners; Faxon is not affiliated with them. “Plan B” is a trademark of Q, LLC; Faxon Firearms is not affiliated with, endorsed by, or sponsored by Q, LLC. Firearm, suppressor, and barrel-length laws vary by state and locality; know and follow the laws where you live.