FAXON 9310 .308 WIN/6.5 CREEDMOOR/8.6 BLK BOLT + FIRING PIN - .125 - NITRIDE

Faxon
SKU:
FF308BCNITRIDE
|
UPC:
816341020900
Availability:
Usually ships within 2 business days when available.
$117.00
(6 reviews)
Current Stock:
Adding to cart… The item has been added

Description

 

AR-10 / LR-308 Replacement Bolt • .308 Win / 6.5 Creedmoor / 8.6 BLK

Faxon 9310 .308 Win / 6.5 Creedmoor / 8.6 BLK Bolt + Firing Pin (.125) – Nitride

.125 Bolt Face  |  9310 Steel  |  MPI Tested  |  Salt Bath Nitride

A drop-in DPMS Gen 1 pattern AR-10 / LR-308 bolt for .308 Winchester, 6.5 Creedmoor and 8.6 Blackout DPMS Gen 1 pattern AR-10s. It's machined from 9310 steel, given a full mil-spec heat treat, shot peened, and magnetic particle inspected, with the back of the lugs chamfered for smoother unlocking. The S7 extractor is heat treated and shot peened, with .308-spec springs and a dual O-ring. Salt bath nitride gives it a hard, slick, corrosion-resistant surface that cleans up faster than phosphate. The firing pin is included.

9310 STEEL

Tougher than standard Carpenter 158; full mil-spec heat treat and shot peened.

MPI TESTED

Magnetic particle inspected to catch flaws in the steel before it ships.

S7 EXTRACTOR

.308-spec springs and dual O-ring.

.125 BOLT FACE

For .308 Winchester, 6.5 Creedmoor and 8.6 Blackout DPMS Gen 1 pattern AR-10s.

Rated 4.6/5 by verified buyers  •  SKU FF308BCNITRIDE  •  Made in the USA  •  Faxon Lifetime Guarantee

Specifications

Part numberFF308BCNITRIDE
PlatformAR-10 / LR-308, DPMS Gen 1 pattern
Bolt face.125
Bolt material9310 steel
Bolt heat treatFull mil-spec heat treatment, shot peened
Bolt inspectionMagnetic particle inspected (MPI)
LugsBack of lugs chamfered
ExtractorS7 tool steel, heat treated and shot peened; .308-spec springs and dual O-ring
FinishSalt bath nitride
IncludedBolt assembly and firing pin
UPC816341020900
Made inUSA
WarrantyFaxon Lifetime Guarantee

Fitment

Calibers.308 Winchester, 6.5 Creedmoor and 8.6 Blackout DPMS Gen 1 pattern AR-10s
CarrierStandard DPMS Gen 1 pattern AR-10 carrier
Complete BCGAR-10 Gen 2 BCG

Headspace is set between the bolt and the barrel extension, so a new bolt must be checked with go/no-go gauges before firing unless Faxon headspaced it to your barrel.

When to Replace a Bolt

Swap the bolt when you see cracked or chipped lugs, a cracked cam pin hole, a worn or peened bolt face, or extraction problems that a new extractor and spring don't fix. A spare bolt is also the fastest way to set up a second barrel in the same caliber family: headspace it to the new barrel and keep the pair together.

What Reviewers and Owners Say

“Arrived in a timely manner, perfect fit and finish and operates flawlessly.”

Kenneth E. Smith, FaxonFirearms.com

Average ratings: 4.6 out of 5 stars at FaxonFirearms.com.

FAQs

What does “.125” mean?

It's the bolt face depth this bolt is built for. .308 Winchester, 6.5 Creedmoor and 8.6 Blackout DPMS Gen 1 pattern AR-10s barrels in this family use this bolt face; always confirm your barrel's requirement and check headspace.

Is this bolt magnetic particle inspected?

Yes. Every Faxon bolt is MPI tested, a non-destructive check that finds cracks and inclusions in the steel.

Why 9310 steel instead of Carpenter 158?

9310 is a nickel-chrome-moly alloy with excellent toughness and fatigue strength, so the lugs resist cracking under repeated high-pressure cycles. More on 9310 bolts.

Why salt bath nitride instead of phosphate?

Nitride raises surface hardness and corrosion resistance and lowers friction, so the bolt runs slicker and carbon wipes off more easily.

Where is it made?

Made in the USA to Faxon designs and specifications, and headspace-checked, lot-engraved and inspected by Faxon Firearms in Fairfield, Ohio. Covered by the Faxon Lifetime Guarantee.

Can Faxon headspace this bolt to my barrel?

Faxon offers bolt-to-barrel headspace matching on FaxonFirearms.com orders that include a Faxon barrel. Read how the matching service works. If you are pairing the bolt with a barrel that was not headspaced by Faxon, check it with go/no-go gauges before firing.

Faxon Lifetime Guarantee. Covers manufacturing and material defects to the original purchaser. Excludes damage from misuse, neglect, improper installation, or modifications. Normal wear of springs, extractors, gas rings and finish is not a defect. Register your product at faxonfirearms.com/product-registration. Full terms: faxonfirearms.com/warranty-privacy-terms.

Always verify headspace with go/no-go gauges when pairing a bolt with a barrel that was not headspaced by Faxon. Full-auto, forced reset and other enhanced fire control groups are regulated differently by state and locality; know and follow the laws where you live. Third-party trigger and buffer makers set their own installation requirements; follow them.

For questions, contact customerservice@faxonfirearms.com.

 

Warranty

Faxon Lifetime Guarantee. Covers manufacturing and material defects to the original purchaser. Excludes damage from misuse, neglect, non-standard ammunition, or modifications. Register your product at faxonfirearms.com/product-registration to expedite service. For purchases through dealers or distributors, warranty repairs are handled directly by Faxon Firearms; refunds must be processed through the selling entity. Full policy: faxonfirearms.com/warranty-privacy-terms/

Customers Also Shopped These Items

Reviews

  • 5
    Bolt and firing pin

    Posted by Eric Padgett on Nov 14th 2026

    Solid product. Fixed the issue with my AR 10 build chambered in 6.5 creedmoor. The original bolt and firing pin were blowing primers. This bolt and firing pin combination fixed the issue. My ar cycles perfectly now. The coating on it is nice and slick as well as easy to clean too. Overall very happy with this purchase.

  • 5
    Faxon 9310 .308/6.5 creedmoor/8.6 BLK BOLT + FIRING PIN

    Posted by Kenneth E. Smith on May 25th 2026

    Arrived in a timely manner, perfect fit and finish and operates flawlessly...

  • 4
    Extractor is MIM S7 tools steel, NOT Billet S7 Tool steel!

    Posted by Joe A on May 31st 2025

    Extractor broke after just 20 rounds. I give 4 stars as they are sending me a replacement and explained S7 tool steel does not necessarily mean traditional billet machined. There is powdered S7 that is MIM. And that is what these are.

  • 4
    AR 10 BOLT

    Posted by John on Sep 10th 2020

    Parts delivered on time and quality machining.

  • 5
    .308 Bolt

    Posted by Ray W on Feb 22nd 2018

    The bolt is top quality. I bought a barrel with the head spaced bolt. The only thing that I noticed is that the firing pin hole is slightly larger than my Aero Precision bolt that it replaced. The larger orifice caused some primer cratering, but that’s really not a problem.

  • 5
    Looks/fits good

    Posted by Robert on Aug 3rd 2017

    Looks and feels like great quality