FAXON MATCH SERIES FLAME FLUTED® THREADED BARREL FOR G17 GEN 2-4 9MM IN TIN PVD
Faxon
$133.00
(2 reviews)
Write a Review
Faxon
FAXON MATCH SERIES FLAME FLUTED® THREADED BARREL FOR G17 GEN 2-4 9MM IN TIN PVD
Description
Pistol Barrels › For Glock® › For G17 | Works with: EXOS-513 for Gen 3 • EXOS-543 for Gen 4
Fit and Compatibility
This barrel is a direct replacement for the factory barrel in Glock® 17 Gen 2, Gen 3, and Gen 4 slides. It is machined to tight tolerances for consistent lockup, and it drops into factory-spec slides with no gunsmithing. On some aftermarket slides, minor fitting may be needed.
Aftermarket slides: there is a known compatibility issue with some Zaffiri Precision slides (ZPS.3v2 and ZPS.6 patterns) because of top-window size and placement.
Shipping: threaded barrels cannot be shipped to California.
How It’s Made
Every Faxon pistol barrel starts as a long 416-R stainless barrel blank that Faxon rifles in-house before it is ever cut into pistol barrels. That way the whole blank gets the same rifling, inspection, and stress relief, and every barrel cut from it starts from a qualified bore.
- Drill and ream: 416-R stainless bar gun-drilled and reamed as a long blank
- Button rifle: Button rifled 1:10, six grooves
- Air gauge: Bore and rifling air gauged
- Stress relieve: Stress relieved in-house after rifling, just like Faxon rifle barrels
- Cut and qualify: Blank cut to length and qualify-turned true to the bore
- Turn and mill: Hood, lugs, and Flame Fluted® profile turned and milled; 9mm SAAMI chamber and target crown cut; muzzle threaded 1/2x28
- Heat treat: 416-R heat treated to pistol-barrel hardness; 416-R isn’t hard enough for a pistol barrel as bar stock, while 4150 is
- Finish: Titanium nitride (TiN) PVD.
- Mark and inspect: Laser-marked and final inspected
Six-groove button rifling is land-and-groove rifling, not polygonal, so it runs jacketed and cast lead bullets.
How We Inspect It
Faxon pistol barrels are built to a written control plan, and each run is logged on inspection sheets. Here is what this barrel goes through before it ships.
| Burr check | Every barrel inspected for burrs under 10x magnification |
| Hood fit | Every hood run through a go/thru gauge |
| CMM | First and last barrel of every run checked on the CMM |
| First article | Full CMM first-article inspection after any machine maintenance, tool change, or part change, and at least every 30 days |
| Certifications | Material certs checked at receiving; stress relief certified by lot |
Flame Fluted® Profile
Faxon’s patented Flame Fluted® design cuts weight and adds surface area for faster cooling, with the distinctive Faxon look.
What’s in the Box
INCLUDED
G17 Gen 2–4 9mm barrel
416-R stainless, Titanium nitride (TiN) PVD, 4.94″
INCLUDED
Thread protector
For the 1/2x28 muzzle threads.
NOT INCLUDED
Slide, recoil assembly, compensator
Pair a threaded barrel with a Faxon EXOS® compensator or a 1/2x28 suppressor.
Specifications
| Caliber | 9mm Luger (9x19), SAAMI chamber |
| Fits | Glock® 17 Gen 2, Gen 3, and Gen 4 slides |
| Length | 4.94″ |
| Series | Match Series |
| Profile | Flame Fluted® |
| Material | 416-R stainless, heat treated and stress relieved |
| Rifling | Button rifled, 1:10 twist, 6 grooves (land and groove) |
| Inspection | Bore and rifling air gauged |
| Finish | Titanium nitride (TiN) PVD |
| Muzzle | 1/2x28 threaded, target crown; thread protector included |
| Made in | Greater Cincinnati, Ohio, USA |
| FFL | Not required |
What Owners Say
“ONCE AGAIN YOU DELIVERED ANOTHER GREAT MATCH BARREL FOR MY PISTOL, THATS WHY I COME BACK . THANK YOU KEEP ROCKIN”
carl Earls, verified buyer
“High quality barrel, great finish, fast service. Keep up the great work”
Mike, verified buyer
Average rating: 5.0 out of 5 stars from 2 reviews on FaxonFirearms.com.
What Reviewers and Dealer Customers Say
PEW PEW TACTICAL
Hands-on review of a Faxon Match Series barrel.
“I highly recommend Faxon’s Glock barrel for your next build or upgrade.”
THE FIREARM BLOG
TFB Review: Faxon Glock Match Series Threaded Barrel ›
Hands-on review of a Faxon Match Series barrel.
“It dropped in like you would fully expect it to do.”
“Great fitment and operation. The finish looks amazing and is very durable.”
Gregory Sapp, OpticsPlanet review • Read it ›
“this is a good buy, it tightened up my groups at 50 yards.”
S.Dizzie, OpticsPlanet review • Read it ›
Quotes from third-party reviews and dealer listings; some cover the same barrel in another finish or threaded configuration.
Every Faxon Barrel for the G17 Gen 2–4
| Barrel | Steel | Muzzle | Finish | MSRP |
|---|---|---|---|---|
| Match Series Flame Fluted® (this barrel) | 416-R stainless | Threaded | Gold TiN PVD | $133 |
| Duty Series | 4150 CMV | Non-threaded | Black nitride | $98 |
| Duty Series | 4150 CMV | Threaded | Black nitride | $99 |
| Match Series Flame Fluted® | 416-R stainless | Non-threaded | Black nitride | $123 |
| Match Series Flame Fluted® | 416-R stainless | Threaded | Black nitride | $128 |
| Match Series Flame Fluted® | 416-R stainless | Threaded | Chameleon PVD | $133 |
Add a compensator: Faxon EXOS-513 for Gen 3 • Faxon EXOS-543 for Gen 4. Faxon EXOS® comps thread onto the 1/2x28 muzzle; use the included thread locker on the barrel threads only, not on the set screws.
Match Series G17 Gen 2–4 Barrel FAQs
Is this barrel drop-in?
Yes. It is a direct replacement for the factory barrel in Glock® 17 Gen 2, Gen 3, and Gen 4 slides with no gunsmithing on factory-spec slides. Some aftermarket slides may need minor fitting.
How is it rifled?
Button rifled, 1:10 twist, with six grooves. Faxon rifles a long blank in-house, air gauges the bore and rifling, and stress relieves it before cutting it into pistol barrels.
Can I shoot cast lead bullets?
Yes. Six-groove button rifling is land-and-groove rifling, not polygonal, so it runs both jacketed and cast lead bullets.
What is the difference between Duty Series and Match Series pistol barrels?
Duty Series barrels are 4150 CMV in an OEM-style profile with salt-bath nitride inside and out. Match Series barrels are 416-R stainless, heat treated for pistol-barrel hardness, and come in fluted profiles and PVD color options.
What finish is it?
Titanium nitride (TiN) PVD.
Can I run a suppressor or compensator?
Yes. The muzzle is threaded 1/2x28, the common 9mm thread, and a thread protector is included. You will likely need suppressor-height sights to see over a suppressor.
Can it ship to California?
No. Threaded barrels cannot be shipped to California.
Where is it made?
In Greater Cincinnati, Ohio. Pistol barrels ship without an FFL.
GLOCK® is a federally registered trademark of GLOCK, Inc. and GLOCK Ges.m.b.H. Faxon Firearms is not affiliated with or endorsed by them; model names are for compatibility only. Flame Fluted® and EXOS® are trademarks of Faxon Firearms. Know and follow all federal, state, and local laws.
Warranty
Faxon Lifetime Guarantee. Covers manufacturing and material defects to the original purchaser. Excludes damage from misuse, neglect, non-standard ammunition, or modifications. Register your product at faxonfirearms.com/product-registration to expedite service. For purchases through dealers or distributors, warranty repairs are handled directly by Faxon Firearms; refunds must be processed through the selling entity. Full policy: faxonfirearms.com/warranty-privacy-terms/Customers Also Shopped These Items
-
-
Sold Out
-
-
Sold Out
Reviews
-
Barrel
High quality barrel, great finish, fast service. Keep up the great work
-
AWESOME
ONCE AGAIN YOU DELIVERED ANOTHER GREAT MATCH BARREL FOR MY PISTOL, THATS WHY I COME BACK . THANK YOU KEEP ROCKIN