FAXON SUPERFINISHED 10MM PCC BLOWBACK FULL-MASS BCG - GLOCK® - NITRIDE
Faxon
$165.00
(2 reviews)
Write a Review
Faxon
FAXON SUPERFINISHED 10MM PCC BLOWBACK FULL-MASS BCG - GLOCK® - NITRIDE
Description
FRTs, Super Safeties & the Removable Weight
Most forced reset triggers and super safeties need clearance under the rear of a PCC carrier. The Faxon 10mm BCG solves that with a user-removable weight: take it out and the carrier clears most FRTs and super safeties without any cutting. Pulling the weight also lowers reciprocating mass, so re-check your buffer and spring; JP Enterprises and similar short-stroke buffer systems are designed around a carrier without the weight. Follow your trigger and buffer makers' setup guidance.
| Setup | Carrier weight |
| Standard mil-spec or drop-in PCC trigger | Weight in or out (tune buffer to suit) |
| Forced reset trigger (most models) | Weight out |
| Super safety (most models) | Weight out |
| Full-auto fire control group | Compatible (M16 geometry) |
| JP Enterprises / similar short-stroke buffer | Weight out |
Specifications
| Part number | FF10MMBCGCNITRIDE |
| Operation | Direct blowback, full mass |
| Magazine pattern | Glock® |
| Carrier material | Mil-spec 8620 steel, fully heat treated |
| Extractor | External AR-15 / M16 style, pivoting and spring-loaded |
| Firing pin retention | Standard cotter pin |
| Carrier key | Separate from the charging surface |
| Removable weight | Yes |
| Weight | 14.65 oz with the weight installed; 12.0 oz without |
| Fire control | M16 (full-auto) compatible; ramped bottom |
| Finish | Salt bath nitride |
| Dust cover | Compatible |
| UPC | 816341028395 |
| Made in | USA |
| Warranty | Faxon Lifetime Guarantee |
Fitment
| Caliber | 10mm |
| Lower | Glock®-pattern 10mm AR lowers |
| Upper | Standard AR-15 upper with a 10mm blowback barrel |
Blowback PCCs are sensitive to buffer weight and spring rate. Start with the buffer your lower's maker recommends, then tune.
What Reviewers and Owners Say
Built on the same design as Faxon’s 9mm PCC carrier, rated 4.8 stars or better at FaxonFirearms.com, Primary Arms, ArmorAlly and OpticsPlanet.
“This BCG was a perfect match with the 16″ barrel I purchased. The quality and finish are second to none.”
William, FaxonFirearms.com
“Had another bolt that had problems. This one is well made, shoots like butter.”
Robert M., FaxonFirearms.com
“Running two of these, fired thousands of rounds. No problems.”
Steve, Primary Arms
Average ratings: 5.0 out of 5 stars at FaxonFirearms.com; 5.0 out of 5 stars at Primary Arms, 9mm version.
FAQs
Will this 10mm BCG work with a forced reset trigger?
Yes, with the removable weight taken out, which is what most FRTs require for clearance. No carrier cutting is needed. Re-check buffer and spring after removing the weight and follow the trigger maker's setup guidance.
Will it work with a super safety?
Yes. Like most FRTs, most super safeties need the removable weight out for clearance. With it removed, the carrier works without modification.
Is it full-auto compatible?
Yes. The carrier uses M16 geometry with a ramped bottom and is compatible with full-auto fire control groups where legally owned.
What is the removable weight for?
It lets you tune reciprocating mass. Leave it in for a standard buffer setup; take it out for most FRTs and super safeties, or for JP Enterprises and similar short-stroke buffer systems.
What lowers does it fit?
Glock®-pattern 10mm AR lowers.
More for your PCC
Faxon Lifetime Guarantee. Covers manufacturing and material defects to the original purchaser. Excludes damage from misuse, neglect, improper installation, or modifications. Normal wear of springs, extractors, gas rings and finish is not a defect. Register your product at faxonfirearms.com/product-registration. Full terms: faxonfirearms.com/warranty-privacy-terms.
Always verify headspace with go/no-go gauges when pairing a bolt with a barrel that was not headspaced by Faxon. Full-auto, forced reset and other enhanced fire control groups are regulated differently by state and locality; know and follow the laws where you live. Third-party trigger and buffer makers set their own installation requirements; follow them.
For questions, contact customerservice@faxonfirearms.com.
Warranty
Faxon Lifetime Guarantee. Covers manufacturing and material defects to the original purchaser. Excludes damage from misuse, neglect, non-standard ammunition, or modifications. Register your product at faxonfirearms.com/product-registration to expedite service. For purchases through dealers or distributors, warranty repairs are handled directly by Faxon Firearms; refunds must be processed through the selling entity. Full policy: faxonfirearms.com/warranty-privacy-terms/Customers Also Shopped These Items
-
-
Sold Out
-
-
Reviews
-
10MM bolt
Had another bolt had problems did not figure out it was the bolt until complete faliure, this one is well made, shoots like butter
-
10mm bolt carrier group
This BCG was a perfect match with the 16" barrel i purchased. The quality and finish are second to none. And both bought together didn't break the bank. This bcg fit my gibbz upper perfectly. I would and will recommend there products to everyone.