FAXON FX7 PREFIT M24 PROFILE 24" 1:7T .223 REM BOLT ACTION BARREL

Faxon
SKU:
7F1B2237N24N24Q
|
UPC:
810209951733
Availability:
Usually ships within 2 business days when available.
$338.00
(No reviews yet)
Current Stock:

Description

Rifle Barrels › Bolt Action Barrels › FX7 Prefit Barrels › 24″ M24 .223 Rem  |  Works with: FX7 action • FX7 action wrench • 5.56 suppressors • 1/2x28 hub adapter

 

FX7 Prefit • Bolt Action • 24″ M24 • .223 Rem

Faxon FX7 Prefit 24″ M24 .223 Remington Bolt Action Barrel

.223 Remington  |  1:7 Twist  |  M24  |  1/2x28  |  SKU: 7F1B2237N24N24Q

A 24″ M24 .223 Remington barrel prefit for the Faxon FX7 action. The tenon is shouldered and the chamber is cut and headspaced at the factory, so there is no lathe work: install it with an FX7 action wrench and a barrel vise, confirm headspace with GO/NO-GO gauges, and go shoot.

FX7 PREFIT

Shouldered 1.0625-16 tenon, chambered and headspaced at the factory for the Faxon FX7 action. Thread it on, torque it, and verify with gauges.

416-R + 5R + LAPPED

416-R stainless, honed, 5R button rifled, stress relieved, and lapped after chambering for a smooth, consistent bore.

NITRIDE INSIDE & OUT

Salt-bath QPQ nitride hardens the bore and exterior and resists corrosion. 100% wet magnetic particle inspected first.

1/2x28 MUZZLE

Threaded 1/2x28 with a target crown. Thread protector included.

MSRP $338  •  Made in Greater Cincinnati, Ohio  •  Faxon Lifetime Guarantee

How the FX7 Prefit Works

A prefit barrel has its shoulder and chamber machined so that it headspaces correctly when it is torqued against a specific action. Faxon cuts this barrel’s shouldered 1.0625-16 tenon and chamber to headspace on the Faxon FX7 short action, so you do not need a lathe or a gunsmith to cut a chamber. Clamp the barrel in a barrel vise, turn the action onto it with the Faxon FX7 action wrench, torque it, and check headspace with GO and NO-GO gauges before you fire it.

FX7 Prefit barrels are made for the Faxon FX7 action only. Other Remington 700®-pattern actions vary in how far the bolt face sits from the receiver face, so a prefit cut for the FX7 will not reliably headspace on them. For a Remington 700® or a clone, choose a RemAge® barrel, which sets headspace with a nut.

Bolt face: .223 Remington uses a .223-size case head, not the .308 Win-size bolt face. Make sure your FX7 has the bolt face for .223 Remington before you install this barrel, and contact Faxon if you are unsure.

.223 Remington, 1:7 Twist

.223 Remington is affordable, low-recoil, and accurate. The fast 1:7 twist stabilizes heavy .224 match bullets (77 gr and up) as well as lighter varmint bullets, so one barrel covers practice, varmints, and long-range steel.

The M24 Profile at 24″

The M24 is a heavy tactical contour modeled on the classic military sniper profile. It is stiff, slow to heat, and steady from a bag or barricade, which makes it the choice for precision rifle matches and long strings at the range.

How It’s Made

  1. Drill and ream: 416-R stainless bar gun-drilled and reamed
  2. Hone: Bore honed to a fine finish before rifling
  3. Button rifle: 5R button rifled, 1:7 twist
  4. Air gauge: Bore air gauged
  5. Stress relieve: Stress relieved after rifling
  6. Profile and thread: M24 profile turned, 1.0625-16 UNEF tenon and 1/2x28 muzzle threads cut, target crown
  7. Chamber: .223 Remington chamber cut and headspaced to the FX7
  8. Lap: Bore lapped after chambering
  9. MPI and nitride: 100% wet magnetic particle inspected, then salt-bath QPQ nitrided inside and out
  10. Engrave and inspect: Laser-engraved with the cartridge and twist, then final inspected

Salt-bath QPQ nitride is a diffusion treatment, not a plating. It hardens the bore and exterior and adds corrosion resistance while adding virtually nothing to the dimensions, a few ten-thousandths of an inch, roughly a tenth the width of a human hair. It needs little to no break-in.

How We Inspect It

Faxon barrels are built to a written control plan, and each run is logged on inspection sheets. Here is what this barrel goes through before it ships.

BorescopeEvery barrel borescoped after rifling, checking for tearing and sharp rifling corners
Air gaugeBore and groove diameters air gauged at several points along the bore; twist rate and groove count verified
ChamberChecked on the CMM against a dedicated chamber program for the cartridge, first and last barrel of every run
ThreadsEvery muzzle thread and every tenon thread gauged
Magnetic particleEvery barrel, 100% wet magnetic particle inspected for flaws
First articleFull CMM first-article inspection after any machine maintenance, tool change, or part change, and at least every 30 days
CertificationsMaterial certs checked at receiving; stress relief and nitride certified by lot

What’s in the Box

INCLUDED

24″ M24 .223 Rem barrel

416-R stainless, 5R, honed and lapped, QPQ nitride, 1/2x28 muzzle

INCLUDED

Thread protector

Ships with the barrel.

YOU’LL NEED

Tools and action

Faxon FX7 action, FX7 action wrench, barrel vise, GO/NO-GO gauges

Specifications

Cartridge.223 Remington
Length24″ (cut slightly long so it always measures a full 24″)
ProfileM24
Twist / rifling1:7, 5R button rifled
BoreHoned before rifling, lapped after chambering
Material416-R stainless steel, stress relieved
FinishSalt-bath QPQ nitride, bore and exterior
Tenon1.0625-16 UNEF, shouldered prefit (.7265″ thread length)
Muzzle1/2x28, target crown
IncludedThread protector
InspectionAir gauged; 100% wet magnetic particle inspected
Made inGreater Cincinnati, Ohio, USA
WarrantyFaxon Lifetime Guarantee

Fitment

ActionFaxon FX7 short action only
Bolt faceNeeds an FX7 bolt face for .223 Remington
InstallFX7 action wrench and barrel vise; verify with GO/NO-GO gauges
Muzzle devices1/2x28 devices and suppressor adapters
Suppressor5.56 caliber or larger bore

What Owners Say

This barrel doesn’t have reviews on FaxonFirearms.com yet. If you own one, tell other shooters how it runs in the review section below.

Build It Out

ACTION & TOOLS

The action this barrel is made for.

FX7 Receiver, Matte DLC ›  •  FX7 Receiver, Polished DLC ›  •  FX7 Action Wrench ›

SUPPRESSOR

5.56 caliber.

HARMONIX® ION 5.56 ›  •  HARMONIX® Sentry 5.56 ›

MUZZLE

1/2x28 thread.

1/2x28 Direct Thread to HUB Adapter ›

See every barrel in this line on the FX7 Prefit Barrels page, or browse all Faxon bolt action barrels.

FX7 Prefit 24″ M24 .223 Rem FAQs

What actions does this barrel fit?

The Faxon FX7 short action only. The shouldered tenon and chamber are cut to headspace on the FX7. For a Remington 700® or a 700 clone, choose a Faxon RemAge® barrel, which sets headspace with a nut.

Do I need a gunsmith to install it?

No lathe work is needed. Clamp the barrel in a barrel vise, turn the FX7 action on with the Faxon FX7 action wrench, torque it, and verify headspace with GO and NO-GO gauges before firing. If you are not comfortable doing that, have a gunsmith install it.

Does .223 Remington need a different bolt face?

Yes. .223 Remington uses a .223-size case head, not the .308 Win-size bolt face. Your FX7 needs the matching bolt face for .223 Remington. Contact Faxon if you are unsure what your action has.

What comes in the box?

The barrel and thread protector.

Why 416-R stainless and 5R rifling?

416-R machines cleanly and holds a consistent bore. 5R rifling uses five lands with sloped sides instead of sharp corners, which deforms the bullet less and fouls less. Faxon hones the bore before rifling and laps it after chambering for a smooth, consistent finish.

Does a nitrided barrel need break-in?

Little to no break-in. Salt-bath QPQ nitride hardens the bore and resists corrosion and fouling while adding virtually nothing to its dimensions.

Can I run a suppressor?

Yes. The muzzle is threaded 1/2x28. Use a 5.56 caliber or larger suppressor and confirm alignment before firing.

Where is it made?

In Greater Cincinnati, Ohio, and it is covered by the Faxon Lifetime Guarantee.

Remington® and Remington 700® are trademarks of Remington Arms; Savage® is a trademark of Savage Arms; RemAge® is a trademark of its owner. Faxon is not affiliated with Remington or Savage. HARMONIX® and MuzzLok® are trademarks of Faxon Firearms. Always verify headspace before firing, and know and follow all federal, state, and local laws.

Warranty

Faxon Lifetime Guarantee. Covers manufacturing and material defects to the original purchaser. Excludes damage from misuse, neglect, non-standard ammunition, or modifications. Register your product at faxonfirearms.com/product-registration to expedite service. For purchases through dealers or distributors, warranty repairs are handled directly by Faxon Firearms; refunds must be processed through the selling entity. Full policy: faxonfirearms.com/warranty-privacy-terms/

Customers Also Shopped These Items