FAXON FX7 PREFIT M24 PROFILE 24" 22 CREEDMOOR BOLT ACTION BARREL
Faxon
$338.00
(No reviews yet)
Write a Review
Faxon
FAXON FX7 PREFIT M24 PROFILE 24" 22 CREEDMOOR BOLT ACTION BARREL
Faxon FX7 Prefit M24 Profile — 24" 22 Creedmoor Bolt Action Barrel (7F1B22C8N24N24Q)
416-R stainless • 5R button rifled • Honed & lapped • Salt bath nitride • 1/2x28 threads • Recessed target crown • MPI inspected
The Faxon FX7 Prefit 24" 22 Creedmoor M24 Barrel is engineered for shooters building high-velocity, flat-shooting bolt-action rifles optimized for long-range performance. Designed as a prefit barrel specifically for the Faxon FX7 action, the M24 contour provides outstanding rigidity and thermal stability for consistent sub-MOA results across extended shooting sessions.
Starting with 416-R stainless steel, the bore is 5R button rifled, then honed & lapped for a smooth, precise internal finish. A salt bath nitride (QPQ) treatment enhances corrosion resistance and reduces fouling, while the recessed target crown protects accuracy at the muzzle. Each barrel is Magnetic Particle Inspected (MPI) and built to Faxon’s exacting standards in Greater Cincinnati, Ohio.
Ideal Use Cases
This 24" 22 Creedmoor M24 FX7 prefit is optimized for shooters prioritizing high velocity, flat trajectory, and repeatable performance at distance.
- Long-range precision & PRS: 24" length maximizes 22 CM velocity; 1:8 twist stabilizes high-BC match projectiles.
- Suppressed precision builds: 1/2x28 muzzle threads fit common suppressor mounts (confirm your mount and shoulder requirements).
- High-round-count range sessions: QPQ nitride resists corrosion and simplifies cleaning after extended use.
- FX7 bolt builds: Direct prefit compatibility with the Faxon FX7 action (verify headspace and final fitment).
Key Benefits
- FX7 Prefit interface: Engineered specifically to pair cleanly with the Faxon FX7 action.
- 22 Creedmoor, 1:8 twist: Ideal stabilization for high-BC match and hunting bullets in the 22 CM cartridge.
- M24 contour: High-stiffness profile for consistent harmonics and heat management during sustained fire.
- 5R button rifled, honed & lapped: Smooth bore finish supports accuracy and simplifies maintenance.
- Nitride QPQ finish: Corrosion resistance and reduced fouling for long service life.
- Suppressor-ready muzzle: 1/2x28 muzzle threads for common devices and mounts.
- Made in the USA: Family-owned manufacturer in Greater Cincinnati, Ohio.
Specs Snapshot
24" 22 Creedmoor • 1:8 twist • M24 profile • 416-R stainless • 5R honed & lapped • QPQ nitride • 1/2x28 • MPI inspected
Specifications
Install note: Verify headspace and final fitment with your action/bolt. Prefit barrels are intended for competent installation and proper gauging.
FX7 Prefit Tenon Reference
Reference drawing shown for the FX7 Prefit interface.
Frequently Asked Questions
What actions is this barrel compatible with?
This is a Faxon FX7 Prefit barrel designed for the FX7 action and similar receivers using the same prefit interface/spec. Always verify your action specs and confirm headspace with proper gauges.
Is this a “drop-in” barrel?
Prefit barrels are designed to streamline installation, but final safety checks still matter. We recommend installation by a qualified gunsmith and always verifying headspace before firing.
Why is 1:8 twist common for 22 Creedmoor?
A 1:8 twist rate is widely used in 22 Creedmoor because it stabilizes common high-BC match and hunting bullet weights well across typical velocities and conditions.
What muzzle devices fit this barrel?
The muzzle is threaded 1/2x28, which is common for many suppressor mounts and muzzle devices. Confirm device compatibility and shoulder/taper requirements for your specific mount.
What does 5R rifling do?
5R rifling is designed to reduce bullet deformation compared to traditional forms and can support consistency and easier cleaning. Combined with a honed and lapped bore, it supports strong accuracy potential.
Warranty: Backed by the Faxon Lifetime Guarantee. Full details: https://faxonfirearms.com/warranty-privacy-terms/
Warranty: Backed by the Faxon Lifetime Guarantee. Full details available at https://faxonfirearms.com/warranty-privacy-terms/
- Caliber:
- 22 Creedmoor
- Barrel Profile:
- M24
- Barrel Material:
- 416-R Stainless
- Outside Finish:
- Salt Bath Nitride
- Rifling Twist Rate:
- 1:8
- Barrel Weight:
- 5.65 lbs
- Muzzle Thread:
- 1/2x28
- Barrel Length:
- 24"
