FAXON REMAGE STYLE MEDIUM SPORTER PROFILE 22" .308 WIN BOLT ACTION BARREL
Faxon
DUE TO INCREASED ORDER VOLUME, PLEASE ALLOW 2-3 EXTRA BUSINESS DAYS FOR ORDER PROCESSING AND RESPONSES TO CUSTOMER SERVICE INQUIRIES.
HELP INSURE YOUR PACKAGE ARRIVES ON TIME. UPS AND FEDEX HAVE RELIABLE TRACKING AND FEWER DELAYS THAN USPS.
Rifle Barrels › Bolt Action Barrels › RemAge® Barrels › 22″ M24 .308 Win | Works with: .30 suppressors • 5/8x24 hub adapter
A traditional Remington 700® barrel is chambered and shouldered on a lathe to fit one specific action. A RemAge®-style barrel replaces the machined shoulder with a barrel nut, the way Savage® barrels have always worked. Thread the barrel into the action until a GO gauge just closes the bolt, snug the nut against the receiver to lock it there, and check with a NO-GO gauge. The included RemAge® barrel nut is tightened with a standard AR-15 armorer’s (castle nut) wrench.
RemAge® barrels fit factory Remington 700® short actions and similar 700-pattern short actions, and Faxon RemAge® barrels made since December 2023 also fit the Faxon FX7. Because the nut sets headspace, the same barrel works across actions whose bolt-face depth varies.
The .308 Winchester is the classic short-action cartridge: easy to find, easy on barrels, and accurate with everything from 150 gr hunting bullets to 175 and 185 gr match bullets. The 1:10 twist is the standard for .308 and stabilizes that whole range.
The M24 is a heavy tactical contour modeled on the classic military sniper profile. It is stiff, slow to heat, and steady from a bag or barricade, which makes it the choice for precision rifle matches and long strings at the range.
Salt-bath QPQ nitride is a diffusion treatment, not a plating. It hardens the bore and exterior and adds corrosion resistance while adding virtually nothing to the dimensions, a few ten-thousandths of an inch, roughly a tenth the width of a human hair. It needs little to no break-in.
Faxon barrels are built to a written control plan, and each run is logged on inspection sheets. Here is what this barrel goes through before it ships.
| Borescope | Every barrel borescoped after rifling, checking for tearing and sharp rifling corners |
| Air gauge | Bore and groove diameters air gauged at several points along the bore; twist rate and groove count verified |
| Chamber | Checked on the CMM against a dedicated chamber program for the cartridge, first and last barrel of every run |
| Threads | Every muzzle thread and every tenon thread gauged |
| Magnetic particle | Every barrel, 100% wet magnetic particle inspected for flaws |
| First article | Full CMM first-article inspection after any machine maintenance, tool change, or part change, and at least every 30 days |
| Certifications | Material certs checked at receiving; stress relief and nitride certified by lot |
INCLUDED
22″ M24 .308 Win barrel
416-R stainless, 5R, honed and lapped, QPQ nitride, 5/8x24 muzzle
INCLUDED
RemAge® barrel nut, thread protector
Ships with the barrel.
YOU’LL NEED
Tools and action
Remington 700®-pattern short action or FX7, AR-15 armorer’s wrench, barrel vise, GO/NO-GO gauges
| Cartridge | .308 Winchester |
| Length | 22″ (cut slightly long so it always measures a full 22″) |
| Profile | M24 |
| Twist / rifling | 1:10, 5R button rifled |
| Bore | Honed before rifling, lapped after chambering |
| Material | 416-R stainless steel, stress relieved |
| Finish | Salt-bath QPQ nitride, bore and exterior |
| Tenon | 1.0625-16 UNEF, nut-style (1.700″ thread length) |
| Muzzle | 5/8x24, target crown |
| Included | RemAge® barrel nut, thread protector |
| Inspection | Air gauged; 100% wet magnetic particle inspected |
| Made in | Greater Cincinnati, Ohio, USA |
| Warranty | Faxon Lifetime Guarantee |
| Action | Remington 700® short action and similar; Faxon FX7 |
| Bolt face | .308 Win family |
| Install | Set headspace with a GO gauge, lock the RemAge® nut (AR-15 armorer’s wrench) |
| Muzzle devices | 5/8x24 devices and suppressor adapters |
| Suppressor | .30 caliber or larger bore |
“I picked up this barrel as an economical way to try my hand at swapping barrels in my garage on an older R700.”
Justin, verified buyer
Average rating: 5.0 out of 5 stars from 1 review on FaxonFirearms.com.
“I am very pleased with the outcome. The barrel is exceptionally accurate.”
Bocwphua, OpticsPlanet review of Faxon RemAge® barrels • Read it ›
Quotes from third-party reviews and dealer listings; the OpticsPlanet review covers the Faxon RemAge® barrel line, not necessarily this exact cartridge and length.
ACTION RemAge® barrels also fit the FX7. | FX7 Receiver, Matte DLC › • FX7 Receiver, Polished DLC › |
SUPPRESSOR .30 caliber. | HARMONIX® ION .30 › • HARMONIX® Sentry .30 › |
MUZZLE 5/8x24 thread. | 5/8x24 Direct Thread to HUB Adapter › |
| Barrel | Fits | Twist | MSRP |
|---|---|---|---|
| RemAge® 22″ M24 (this barrel) | Rem 700® / FX7 | 1:10 | $337 |
| RemAge® 18″ Gunner | Rem 700® / FX7 | 1:10 | $332 |
| RemAge® 22″ Medium Sporter | Rem 700® / FX7 | 1:10 | $339 |
| Savage® 110 18″ Gunner | Savage® 110 small shank | 1:10 | $332 |
| FX7 Prefit 18″ Gunner | Faxon FX7 | 1:10 | $330 |
| Savage® 110 22″ M24 | Savage® 110 small shank | 1:10 | $337 |
| Savage® 110 22″ Medium Sporter | Savage® 110 small shank | 1:10 | $339 |
See every barrel in this line on the RemAge® Barrels page, or browse all Faxon bolt action barrels.
A Remington 700®-pattern barrel that uses a barrel nut to set headspace instead of a machined shoulder. You thread it in to a GO gauge and lock the nut, so you can install it without a lathe.
Factory Remington 700® short actions and similar 700-pattern short actions, plus the Faxon FX7 (on RemAge® barrels made since December 2023).
A barrel vise, an action wrench for your receiver, an AR-15 armorer’s (castle nut) wrench for the RemAge® nut, and GO/NO-GO headspace gauges for the cartridge.
The barrel and RemAge® barrel nut and thread protector.
416-R machines cleanly and holds a consistent bore. 5R rifling uses five lands with sloped sides instead of sharp corners, which deforms the bullet less and fouls less. Faxon hones the bore before rifling and laps it after chambering for a smooth, consistent finish.
Little to no break-in. Salt-bath QPQ nitride hardens the bore and resists corrosion and fouling while adding virtually nothing to its dimensions.
Yes. The muzzle is threaded 5/8x24. Use a .30 caliber or larger suppressor and confirm alignment before firing.
In Greater Cincinnati, Ohio, and it is covered by the Faxon Lifetime Guarantee.
Remington® and Remington 700® are trademarks of Remington Arms; Savage® is a trademark of Savage Arms; RemAge® is a trademark of its owner. Faxon is not affiliated with Remington or Savage. HARMONIX® and MuzzLok® are trademarks of Faxon Firearms. Always verify headspace before firing, and know and follow all federal, state, and local laws.
Faxon
The Faxon 22" M24 profile barrel is better than I expected. The barrel and remage nut that it comes with makes for a easy headspace at home. It is far beyond the quality I paid for. It currently is going on a Remington 700 build I'm doing and I couldn't be more happier with this Faxon barrel.
I picked up this barrel as an economical way to try my hand at swapping barrels in my garage on an older R700. I’m beyond stoked with how it turned out, as this barrel shoots better than the previous factory 5R barrel I had with most ammo, and by quite a bit. It cleans amazingly easy. Just a few patches of boretech eliminator and the thing is spotless. Probably the best money I’ve spent on my shooting hobby! The finish appeared “dry” when I got it, but a few wipe downs with gun oil during cleanings and people at the range have actually commented on how good it looks.