FAXON MATCH SERIES FLUTED BARREL FOR G48 9MM

Pistol Barrels › For Glock® › For G48

Fit and Compatibility

This barrel is a direct replacement for the factory barrel in Glock® 48 slides. It is machined to tight tolerances for consistent lockup, and it drops into factory-spec slides with no gunsmithing. On some aftermarket slides, minor fitting may be needed.

How It’s Made

Every Faxon pistol barrel starts as a long 416-R stainless barrel blank that Faxon rifles in-house before it is ever cut into pistol barrels. That way the whole blank gets the same rifling, inspection, and stress relief, and every barrel cut from it starts from a qualified bore.

1. Drill and ream: 416-R stainless bar gun-drilled and reamed as a long blank
2. Button rifle: Button rifled 1:10, six grooves
3. Air gauge: Bore and rifling air gauged
4. Stress relieve: Stress relieved in-house after rifling, just like Faxon rifle barrels
5. Cut and qualify: Blank cut to length and qualify-turned true to the bore
6. Turn and mill: Hood, lugs, and Straight Fluted profile turned and milled; 9mm SAAMI chamber and target crown cut
7. Heat treat: 416-R heat treated to pistol-barrel hardness; 416-R isn’t hard enough for a pistol barrel as bar stock, while 4150 is
8. Finish: Salt-bath QPQ nitrided inside and out
9. Mark and inspect: Laser-marked and final inspected

Six-groove button rifling is land-and-groove rifling, not polygonal, so it runs jacketed and cast lead bullets. Salt-bath QPQ nitride is a diffusion treatment, not a plating: it hardens the bore and exterior and adds corrosion resistance and lubricity while adding virtually nothing to the dimensions.

How We Inspect It

Faxon pistol barrels are built to a written control plan, and each run is logged on inspection sheets. Here is what this barrel goes through before it ships.

Straight Fluted Profile

Straight flutes trim weight and add surface area for cooling while keeping the barrel compact and clean-looking.

What’s in the Box

What Owners Say

Average rating: 5.0 out of 5 stars from 1 review on FaxonFirearms.com.

What Reviewers and Dealer Customers Say

Quotes from third-party reviews and dealer listings; some cover the same barrel in another finish or threaded configuration.

Every Faxon Barrel for the G48

Match Series G48 Barrel FAQs

Is this barrel drop-in?

Yes. It is a direct replacement for the factory barrel in Glock® 48 slides with no gunsmithing on factory-spec slides. Some aftermarket slides may need minor fitting.

How is it rifled?

Button rifled, 1:10 twist, with six grooves. Faxon rifles a long blank in-house, air gauges the bore and rifling, and stress relieves it before cutting it into pistol barrels.

Can I shoot cast lead bullets?

Yes. Six-groove button rifling is land-and-groove rifling, not polygonal, so it runs both jacketed and cast lead bullets.

What is the difference between Duty Series and Match Series pistol barrels?

Duty Series barrels are 4150 CMV in an OEM-style profile with salt-bath nitride inside and out. Match Series barrels are 416-R stainless, heat treated for pistol-barrel hardness, and come in fluted profiles and PVD color options.

What finish is it?

Salt-bath QPQ nitride, inside and out.

Where is it made?

In Greater Cincinnati, Ohio. Pistol barrels ship without an FFL.

GLOCK® is a federally registered trademark of GLOCK, Inc. and GLOCK Ges.m.b.H. Faxon Firearms is not affiliated with or endorsed by them; model names are for compatibility only. Flame Fluted® and EXOS® are trademarks of Faxon Firearms. Know and follow all federal, state, and local laws.