FAXON SUPERFINISHED 9MM PCC BLOWBACK FULL-MASS BCG GLOCK®/COLT® GEN 2 - NITRIDE
Faxon
$165.00
(21 reviews)
Write a Review
Faxon
FAXON SUPERFINISHED 9MM PCC BLOWBACK FULL-MASS BCG GLOCK®/COLT® GEN 2 - NITRIDE
Description
FRTs, Super Safeties & the Removable Weight
Most forced reset triggers and super safeties need clearance under the rear of a PCC carrier. The Faxon 9mm BCG solves that with a user-removable weight: take it out and the carrier clears most FRTs and super safeties without any cutting. Pulling the weight also lowers reciprocating mass, so re-check your buffer and spring; JP Enterprises and similar short-stroke buffer systems are designed around a carrier without the weight. Follow your trigger and buffer makers' setup guidance.
| Setup | Carrier weight |
| Standard mil-spec or drop-in PCC trigger | Weight in or out (tune buffer to suit) |
| Forced reset trigger (most models) | Weight out |
| Super safety (most models) | Weight out |
| Full-auto fire control group | Compatible (M16 geometry) |
| JP Enterprises / similar short-stroke buffer | Weight out |
Specifications
| Part number | FF9MMBCGCNITRIDE |
| Operation | Direct blowback, full mass |
| Magazine pattern | Glock® and Colt (also MP5-magazine lowers) |
| Carrier material | Mil-spec 8620 steel, fully heat treated |
| Extractor | External AR-15 / M16 style, pivoting and spring-loaded |
| Firing pin retention | Standard cotter pin |
| Carrier key | Separate from the charging surface |
| Removable weight | Yes |
| Weight | 14.9 oz |
| Fire control | M16 (full-auto) compatible; ramped bottom |
| Finish | Salt bath nitride |
| Dust cover | Compatible |
| UPC | 816341022805 |
| Made in | USA |
| Warranty | Faxon Lifetime Guarantee |
Fitment
| Caliber | 9mm |
| Lower | Glock®-pattern, Colt-pattern and MP5-magazine 9mm AR lowers |
| Upper | Standard AR-15 upper with a 9mm blowback barrel |
| Refresh kit | FF-BCGPK-02 9mm BCG Refresh Kit |
Blowback PCCs are sensitive to buffer weight and spring rate. Start with the buffer your lower's maker recommends, then tune.
What Reviewers and Owners Say
Rated 4.8 stars or better at FaxonFirearms.com, Primary Arms, ArmorAlly and OpticsPlanet, by owners running it in Aero EPC, Glock-pattern and Colt-pattern builds.
“Running two of these, fired thousands of rounds. No problems.”
Steve, Primary Arms
“I bought this bcg to put in a build I was doing with a binary trigger and it exceeded my expectations!”
Fabian, FaxonFirearms.com
“Excellent fit and finish. It functions absolutely perfect.”
Richard M., ArmorAlly
Average ratings: 5.0 out of 5 stars at FaxonFirearms.com; 5.0 out of 5 stars at Primary Arms; 4.9 out of 5 stars at ArmorAlly; 4.8 out of 5 stars at OpticsPlanet.
FAQs
Will this 9mm BCG work with a forced reset trigger?
Yes, with the removable weight taken out, which is what most FRTs require for clearance. No carrier cutting is needed. Re-check buffer and spring after removing the weight and follow the trigger maker's setup guidance.
Will it work with a super safety?
Yes. Like most FRTs, most super safeties need the removable weight out for clearance. With it removed, the carrier works without modification.
Is it full-auto compatible?
Yes. The carrier uses M16 geometry with a ramped bottom and is compatible with full-auto fire control groups where legally owned.
What is the removable weight for?
It lets you tune reciprocating mass. Leave it in for a standard buffer setup; take it out for most FRTs and super safeties, or for JP Enterprises and similar short-stroke buffer systems.
What lowers does it fit?
Glock®-pattern and Colt-pattern 9mm AR lowers, plus MP5-magazine lowers.
Is there a refresh kit for this BCG?
Yes. The 9mm BCG Refresh Kit (FF-BCGPK-02) replaces the extractor, extractor spring and O-ring, firing pin, firing pin spring and retaining pins.
More for your PCC
Faxon Lifetime Guarantee. Covers manufacturing and material defects to the original purchaser. Excludes damage from misuse, neglect, improper installation, or modifications. Normal wear of springs, extractors, gas rings and finish is not a defect. Register your product at faxonfirearms.com/product-registration. Full terms: faxonfirearms.com/warranty-privacy-terms.
Always verify headspace with go/no-go gauges when pairing a bolt with a barrel that was not headspaced by Faxon. Full-auto, forced reset and other enhanced fire control groups are regulated differently by state and locality; know and follow the laws where you live. Third-party trigger and buffer makers set their own installation requirements; follow them.
For questions, contact customerservice@faxonfirearms.com.
Warranty
Faxon Lifetime Guarantee. Covers manufacturing and material defects to the original purchaser. Excludes damage from misuse, neglect, non-standard ammunition, or modifications. Register your product at faxonfirearms.com/product-registration to expedite service. For purchases through dealers or distributors, warranty repairs are handled directly by Faxon Firearms; refunds must be processed through the selling entity. Full policy: faxonfirearms.com/warranty-privacy-terms/Customers Also Shopped These Items
-
-
-
-
Sold Out
Reviews
-
Fantastic bcg
Great workmanship, works flawless. Looks great. Terrific customer service
-
Havent shot it yet
Fit and finish is nice no sharp edges. Got the faxon barrel too so should head space right. Hopefully it runs w/ psa glock lower
-
Works Perfect
I built a 9mm AR with this bolt and Faxon 9mm barrel I am very happy with my new PCC this bolt is next level S$!+ Faxon put alot of thought into this bolt I'm glad I waited for it to come into stock instead of buying another brand the only thing that I could really complain about is that the bolt hold back mechanism does not work on this bolt