FAXON SUPERFINISHED 5.56 M16 BOLT CARRIER GROUP - TIN PVD
FaxonDescription
Built Past Mil-Spec Where It Counts
A bolt carrier group lives a hard life: every shot slams the bolt into battery, unlocks it under pressure, and drags the extractor across the case rim. Faxon starts with the mil-spec baseline and upgrades the parts that wear or break first.
9310 steel bolt
Tougher than standard Carpenter 158, MPI tested and shot peened, with the back of the lugs chamfered for smoother unlocking. Why 9310 matters.
S7 extractor
Heat treated and shot peened, with spring, insert and “Crane” O-ring installed for steady extraction tension.
Staked gas key
Grade 8 fasteners, fully staked so the gas key can’t loosen and leak gas.
Superfinished 8620 carrier
Mil-spec 8620 steel carrier body with a refined surface that reduces friction and fouling, so it cycles smoothly and wipes clean.
Made in the USA to Faxon designs and specifications. Faxon checks bolt headspace, laser-engraves each carrier with the Faxon Shield and a lot number, and gives every carrier group a final inspection in Fairfield, Ohio before it ships.
FRT, Super Safety & Full-Auto Compatibility
An M16-pattern carrier keeps the full-length bottom and the auto sear trip surface that a semi-auto cut removes. That extra mass and full-length rear is what full-auto fire control groups need, and it's what most forced reset triggers and super safeties are designed around. It also gives every Faxon carrier the same mass and timing whether you run it semi-auto or with an enhanced trigger.
| Fire control | Works with this BCG |
| Full-auto fire control groups | Yes — M16 pattern, full-auto rated |
| Forced reset triggers (FRT) | Yes — when the trigger needs no carrier modification |
| Super safeties | Yes — when the safety needs no carrier modification |
| Binary and other enhanced triggers | Yes — follow the trigger maker’s buffer and spring guidance |
| Semi-auto mil-spec triggers | Yes |
Specifications
| Part number | FF556BCGCNITRIDE-TiN |
| Carrier | 8620 steel, full-mass M16 pattern, forward assist serrations, dust cover compatible |
| Bolt face | .125 (5.56 / .223) |
| Bolt material | 9310 steel |
| Bolt heat treat | Full mil-spec heat treatment, shot peened |
| Bolt testing | High-pressure tested (HPT) and magnetic particle inspected (MPI) |
| Lugs | Back of lugs chamfered |
| Extractor | S7 tool steel, heat treated and shot peened; spring, insert and “Crane” O-ring installed |
| Gas key | Grade 8 fasteners, fully staked |
| Finish | Salt bath nitride on the bolt and carrier, with a TiN (titanium nitride) PVD coating on the carrier and gas key |
| Carrier surface | Faxon Superfinish |
| UPC | 816341024632 |
| Made in | USA |
| Warranty | Faxon Lifetime Guarantee |
Fitment
| Calibers | 5.56 NATO, .223 Rem, .223 Wylde, .300 BLK, and other cartridges built on the 5.56 bolt face (350 Legend, 400 Legend) |
| Platform | AR-15 / M16 pattern upper receivers |
| Fire control | Semi, full-auto, FRT and super safety (no carrier modification) |
| Also works with | 300 Blackout AR-15 builds |
Headspace is set by the bolt and the barrel extension. If your barrel was not headspaced to this bolt by Faxon, check it with go/no-go gauges before firing.
What Reviewers and Owners Say
Owners rate the TiN PVD version a perfect 5 stars, and the nitride carrier underneath is the same one behind Faxon’s best-selling BCG.
“I'm a gunsmith in Colorado. This is by far the best BCG I've ordered. Not only does it look great, it cleans up amazing and runs very smooth.”
Kevin, FaxonFirearms.com
“Currently own 3 of these BCGs paired with Faxon barrels. The fit and finish is second to none. Coating is super smooth and durable.”
Benjamin F., FaxonFirearms.com
“This BCG exudes quality and superior craftsmanship. Plus the gold hue makes it pop.”
OceanGuy808, FaxonFirearms.com
Average ratings: 5.0 out of 5 stars at FaxonFirearms.com; 4.9 out of 5 stars at FaxonFirearms.com, nitride M16 BCG.
FAQs
Is this BCG compatible with forced reset triggers (FRT)?
Yes. Every Faxon AR-15 bolt carrier group uses a full-auto rated M16-pattern carrier, and it works with forced reset triggers (FRTs) and super safeties as long as the trigger or safety you choose does not require physically modifying the carrier. Function depends on the whole system, so follow your trigger maker's buffer, spring and gas recommendations.
Will it work with a super safety?
Yes, on the same terms as FRTs: if the super safety does not call for cutting or otherwise modifying the carrier, a Faxon M16-pattern BCG drops in. The full-auto rated carrier profile is what most super safety and FRT makers ask for.
Is it full-auto rated?
Yes. It's an M16-pattern carrier with the full-length bottom and auto sear trip surface, rated for full-auto fire control groups where they're legally owned.
What is TiN PVD?
Titanium nitride applied by physical vapor deposition. It's a thin, very hard, gold-colored coating on the carrier and gas key that adds wear resistance and makes carbon easier to wipe off. The bolt and carrier are nitrided underneath.
What do HPT and MPI mean?
HPT (high-pressure testing) proof-loads the bolt with a high-pressure round to confirm it holds up beyond normal service pressure. MPI (magnetic particle inspection) then checks the steel for cracks and flaws you can't see. Every Faxon AR-15 BCG bolt gets both.
What is 9310 steel and why use it for the bolt?
9310 is a nickel-chrome-moly alloy steel known for toughness and fatigue resistance. Faxon uses it in place of standard Carpenter 158 so the bolt lugs hold up better under repeated high-pressure cycles. More on 9310 bolts.
What does Superfinished mean?
Superfinish is Faxon's refined surface on the carrier body. It reduces friction and carbon adhesion, so the carrier cycles smoothly and wipes clean faster.
Where is it made?
Made in the USA to Faxon designs and specifications, and headspace-checked, lot-engraved and inspected by Faxon Firearms in Fairfield, Ohio. Covered by the Faxon Lifetime Guarantee.
Can Faxon headspace this bolt to my barrel?
Faxon offers bolt-to-barrel headspace matching on FaxonFirearms.com orders that include a Faxon barrel. Read how the matching service works. If you are pairing the bolt with a barrel that was not headspaced by Faxon, check it with go/no-go gauges before firing.
Compare Faxon AR-15 bolt carrier groups
Faxon Lifetime Guarantee. Covers manufacturing and material defects to the original purchaser. Excludes damage from misuse, neglect, improper installation, or modifications. Normal wear of springs, extractors, gas rings and finish is not a defect. Register your product at faxonfirearms.com/product-registration. Full terms: faxonfirearms.com/warranty-privacy-terms.
Always verify headspace with go/no-go gauges when pairing a bolt with a barrel that was not headspaced by Faxon. Full-auto, forced reset and other enhanced fire control groups are regulated differently by state and locality; know and follow the laws where you live. Third-party trigger and buffer makers set their own installation requirements; follow them.
For questions, contact customerservice@faxonfirearms.com.
Warranty
Faxon Lifetime Guarantee. Covers manufacturing and material defects to the original purchaser. Excludes damage from misuse, neglect, non-standard ammunition, or modifications. Register your product at faxonfirearms.com/product-registration to expedite service. For purchases through dealers or distributors, warranty repairs are handled directly by Faxon Firearms; refunds must be processed through the selling entity. Full policy: faxonfirearms.com/warranty-privacy-terms/Customers Also Shopped These Items
Reviews
-
Bolt carrier group
Faxon makes great BCG’s. I have the same style in my 9mm AR carbine. They are machined to the highest standards.
-
Top Quality
Currently own 3 of these BGCs paired with Faxon Barrels. The fit and finish is second to none. Coating is super smooth and durable. Will continue purchasing from Faxon.
-
Faxon 5.56 BCG, TiN PVD
This BCG exudes quality and superior craftsmanship. Plus the gold hue makes it pop. This sucker is as smooth as butter
-
Best BCG I’ve ever had!
If you are looking for an amazing BCG look no further. I’m a gunsmith in Colorado. This is by far the best BCG I’ve ordered. Not only does it look great it cleans up amazing and runs very smooth. I’ve matched this BCG with binaries and mil spec triggers and it runs. Lost count of how many rounds I ran through at the last range but it ejected and ran very well. Definitely gonna get more of them and recommend them highly!