FAXON FX7 PREFIT MEDIUM SPORTER PROFILE 12" 1:6T 8.6 BLK SAAMI BOLT ACTION BARREL

Faxon
SKU:
7F1B866N12NMQ
|
UPC:
810209951580
Availability:
Usually ships within 2 business days when available.
$316.00
(No reviews yet)
Current Stock:

Description

Rifle Barrels › Bolt Action Barrels › FX7 Prefit Barrels › 12″ Medium Sporter 8.6 BLK  |  Works with: FX7 action • FX7 action wrench • .36 suppressors • M18x1.5 hub adapter • 8.6 BLK gauges

 

FX7 Prefit • Bolt Action • 12″ Medium Sporter • 8.6 BLK

Faxon FX7 Prefit 12″ Medium Sporter 8.6 Blackout (SAAMI) Bolt Action Barrel

8.6 Blackout (SAAMI)  |  1:6 Twist  |  Medium Sporter  |  M18x1.5  |  SKU: 7F1B866N12NMQ

A 12″ Medium Sporter 8.6 Blackout (SAAMI) barrel prefit for the Faxon FX7 action. The tenon is shouldered and the chamber is cut and headspaced at the factory, so there is no lathe work: install it with an FX7 action wrench and a barrel vise, confirm headspace with GO/NO-GO gauges, and go shoot.

FX7 PREFIT

Shouldered 1.0625-16 tenon, chambered and headspaced at the factory for the Faxon FX7 action. Thread it on, torque it, and verify with gauges.

416-R + 5R + LAPPED

416-R stainless, honed, 5R button rifled, stress relieved, and lapped after chambering for a smooth, consistent bore.

NITRIDE INSIDE & OUT

Salt-bath QPQ nitride hardens the bore and exterior and resists corrosion. 100% wet magnetic particle inspected first.

M18x1.5 MUZZLE

Tapered-shoulder M18x1.5 with taper adapter and thread protector included. Pairs with .36 cal suppressors.

MSRP $316  •  Made in Greater Cincinnati, Ohio  •  Faxon Lifetime Guarantee

How the FX7 Prefit Works

A prefit barrel has its shoulder and chamber machined so that it headspaces correctly when it is torqued against a specific action. Faxon cuts this barrel’s shouldered 1.0625-16 tenon and chamber to headspace on the Faxon FX7 short action, so you do not need a lathe or a gunsmith to cut a chamber. Clamp the barrel in a barrel vise, turn the action onto it with the Faxon FX7 action wrench, torque it, and check headspace with GO and NO-GO gauges before you fire it.

FX7 Prefit barrels are made for the Faxon FX7 action only. Other Remington 700®-pattern actions vary in how far the bolt face sits from the receiver face, so a prefit cut for the FX7 will not reliably headspace on them. For a Remington 700® or a clone, choose a RemAge® barrel, which sets headspace with a nut.

8.6 Blackout (SAAMI), 1:6 Twist

8.6 Blackout is now SAAMI-standardized at a 1:6 twist. This barrel is chambered and rifled to that SAAMI spec, so it runs SAAMI-spec 8.6 BLK ammunition, subsonic and supersonic. Faxon also makes 8.6 BLK barrels in the original 1:3 twist.

Learn more in Faxon’s 8.6 Blackout guide. The M18x1.5 muzzle has a tapered shoulder, and the taper adapter in the box lets you run standard M18x1.5 muzzle devices and suppressor adapters. For suppressors, pick a .36 caliber can such as the HARMONIX® ION .36.

The Medium Sporter Profile at 12″

The Medium Sporter is a classic sporter contour with more steel than a light hunting barrel. It balances weight and stiffness for rifles you carry and still want to shoot well from a bench, and it is a natural fit for short suppressed builds.

8.6 Blackout cartridge drawing reference for ammunition specification

8.6 Blackout SAAMI cartridge reference.

Ammunition note: use SAAMI-spec 8.6 BLK ammunition. Loads made for semi-auto rifles can have hard primers that cause light strikes in bolt actions.

How It’s Made

  1. Drill and ream: 416-R stainless bar gun-drilled and reamed
  2. Hone: Bore honed to a fine finish before rifling
  3. Button rifle: 5R button rifled, 1:6 twist
  4. Air gauge: Bore air gauged
  5. Stress relieve: Stress relieved after rifling
  6. Profile and thread: Medium Sporter profile turned, 1.0625-16 UNEF tenon and M18x1.5 muzzle threads cut, target crown
  7. Chamber: 8.6 Blackout (SAAMI) chamber cut and headspaced to the FX7
  8. Lap: Bore lapped after chambering
  9. MPI and nitride: 100% wet magnetic particle inspected, then salt-bath QPQ nitrided inside and out
  10. Engrave and inspect: Laser-engraved with the cartridge and twist, then final inspected

Salt-bath QPQ nitride is a diffusion treatment, not a plating. It hardens the bore and exterior and adds corrosion resistance while adding virtually nothing to the dimensions, a few ten-thousandths of an inch, roughly a tenth the width of a human hair. It needs little to no break-in.

How We Inspect It

Faxon barrels are built to a written control plan, and each run is logged on inspection sheets. Here is what this barrel goes through before it ships.

BorescopeEvery barrel borescoped after rifling, checking for tearing and sharp rifling corners
Air gaugeBore and groove diameters air gauged at several points along the bore; twist rate and groove count verified
ChamberChecked on the CMM against a dedicated chamber program for the cartridge, first and last barrel of every run
ThreadsEvery muzzle thread and every tenon thread gauged
Magnetic particleEvery barrel, 100% wet magnetic particle inspected for flaws
First articleFull CMM first-article inspection after any machine maintenance, tool change, or part change, and at least every 30 days
CertificationsMaterial certs checked at receiving; stress relief and nitride certified by lot

What’s in the Box

INCLUDED

12″ Medium Sporter 8.6 BLK barrel

416-R stainless, 5R, honed and lapped, QPQ nitride, M18x1.5 muzzle

INCLUDED

Thread protector, taper adapter

Ships with the barrel. The adapter seats on the tapered M18x1.5 shoulder.

YOU’LL NEED

Tools and action

Faxon FX7 action, FX7 action wrench, barrel vise, GO/NO-GO gauges

Specifications

Cartridge8.6 Blackout (SAAMI)
Length12″ (cut slightly long so it always measures a full 12″)
ProfileMedium Sporter
Twist / rifling1:6, 5R button rifled
BoreHoned before rifling, lapped after chambering
Material416-R stainless steel, stress relieved
FinishSalt-bath QPQ nitride, bore and exterior
Tenon1.0625-16 UNEF, shouldered prefit (.7265″ thread length)
MuzzleM18x1.5-6g, tapered shoulder, target crown
IncludedThread protector, taper adapter
InspectionAir gauged; 100% wet magnetic particle inspected
Made inGreater Cincinnati, Ohio, USA
WarrantyFaxon Lifetime Guarantee

Fitment

ActionFaxon FX7 short action only
Bolt face.308 Win family
InstallFX7 action wrench and barrel vise; verify with GO/NO-GO gauges
Muzzle devicesM18x1.5 devices and suppressor adapters, with the included taper adapter
Suppressor.36 caliber or larger bore

What Owners Say

This barrel doesn’t have reviews on FaxonFirearms.com yet. If you own one, tell other shooters how it runs in the review section below.

Build It Out

ACTION & TOOLS

The action this barrel is made for.

FX7 Receiver, Matte DLC ›  •  FX7 Receiver, Polished DLC ›  •  FX7 Action Wrench ›

SUPPRESSOR

.36 caliber.

HARMONIX® ION .36 ›  •  HARMONIX® Sentry .36 ›

MUZZLE

M18x1.5 thread.

M18x1.5 Direct Thread to HUB Adapter ›  •  MuzzLok® Plan B M18x1.5 Brake ›

GAUGES

Verify headspace.

8.6 BLK GO/NO-GO Gauge Set ›  •  8.6 Blackout Guide ›

Other 8.6 BLK Bolt Action Barrels

BarrelFitsTwistMSRP
FX7 Prefit 12″ Medium Sporter (this barrel)Faxon FX71:6$316
FX7 Prefit 12″ Medium SporterFaxon FX71:3$316
FX7 Prefit 16″ Medium SporterFaxon FX71:3$322
FX7 Prefit 16″ Medium SporterFaxon FX71:6$322
Savage® 110 12″ Medium SporterSavage® 110 small shank1:3$320
Savage® 110 12″ Medium SporterSavage® 110 small shank1:6$320
RemAge® 12″ Medium SporterRem 700® / FX71:3$319

See every barrel in this line on the FX7 Prefit Barrels page, or browse all Faxon bolt action barrels.

FX7 Prefit 12″ Medium Sporter 8.6 BLK FAQs

What actions does this barrel fit?

The Faxon FX7 short action only. The shouldered tenon and chamber are cut to headspace on the FX7. For a Remington 700® or a 700 clone, choose a Faxon RemAge® barrel, which sets headspace with a nut.

Do I need a gunsmith to install it?

No lathe work is needed. Clamp the barrel in a barrel vise, turn the FX7 action on with the Faxon FX7 action wrench, torque it, and verify headspace with GO and NO-GO gauges before firing. If you are not comfortable doing that, have a gunsmith install it.

What comes in the box?

The barrel and thread protector and taper adapter.

Why 416-R stainless and 5R rifling?

416-R machines cleanly and holds a consistent bore. 5R rifling uses five lands with sloped sides instead of sharp corners, which deforms the bullet less and fouls less. Faxon hones the bore before rifling and laps it after chambering for a smooth, consistent finish.

Does a nitrided barrel need break-in?

Little to no break-in. Salt-bath QPQ nitride hardens the bore and resists corrosion and fouling while adding virtually nothing to its dimensions.

Can I run a suppressor?

Yes. The muzzle is threaded M18x1.5 with a tapered shoulder; use the included taper adapter with standard M18x1.5 devices and adapters, and a .36 caliber or larger suppressor.

What does SAAMI 1:6 mean for 8.6 BLK?

SAAMI standardized 8.6 Blackout with a 1:6 twist, so this barrel is built to run SAAMI-spec 8.6 BLK ammunition. Faxon still makes the original 1:3 twist for shooters who load for it.

Where is it made?

In Greater Cincinnati, Ohio, and it is covered by the Faxon Lifetime Guarantee.

Remington® and Remington 700® are trademarks of Remington Arms; Savage® is a trademark of Savage Arms; RemAge® is a trademark of its owner. Faxon is not affiliated with Remington or Savage. HARMONIX® and MuzzLok® are trademarks of Faxon Firearms. Always verify headspace before firing, and know and follow all federal, state, and local laws.

Warranty

Faxon Lifetime Guarantee. Covers manufacturing and material defects to the original purchaser. Excludes damage from misuse, neglect, non-standard ammunition, or modifications. Register your product at faxonfirearms.com/product-registration to expedite service. For purchases through dealers or distributors, warranty repairs are handled directly by Faxon Firearms; refunds must be processed through the selling entity. Full policy: faxonfirearms.com/warranty-privacy-terms/

Customers Also Shopped These Items