FAXON MATCH SERIES FLAME FLUTED® BARREL FOR P320 COMPACT 9MM

Faxon
SKU:
320B910NCLOQ-N
|
UPC:
816341022980
Availability:
Usually ships within 2 business days when available.
$123.00
(3 reviews)
Current Stock:
Adding to cart… The item has been added

Description

Pistol Barrels › For SIG® › For P320 Compact

 

Match Series • P320 Compact • 9mm

Faxon Match Series Flame Fluted® Barrel for SIG® P320 Compact, 9mm

9mm  |  3.84″  |  Flame Fluted®  |  Non-Threaded  |  SKU: 320B910NCLOQ-N

A drop-in 9mm barrel for SIG® P320 Compact slides, machined from 416-R stainless with a Flame Fluted® profile. Faxon button rifles the bore 1:10 with six grooves, stress relieves and heat treats the steel, and finishes it in salt-bath QPQ nitride, inside and out.

DROP-IN FIT

Made for SIG® P320 Compact slides. No gunsmithing on factory-spec slides.

BUTTON RIFLED 1:10

Six-groove button rifling, air gauged. Runs jacketed and cast lead bullets.

416-R STAINLESS

Heat treated and stress relieved after rifling.

NITRIDE INSIDE & OUT

Salt-bath QPQ nitride, inside and out. Hard, slick, and corrosion resistant.

MSRP $123  •  Made in Greater Cincinnati, Ohio  •  No FFL required  •  5.0★ from 3 owner reviews

Fit and Compatibility

This barrel is a direct replacement for the factory barrel in SIG® P320 Compact slides. It is machined to tight tolerances for consistent lockup, and it drops into factory-spec slides with no gunsmithing. On some aftermarket slides, minor fitting may be needed.

Compatibility: Not compatible with X-Carry or X-Compact models, or slides with a Tactile Loaded Chamber Indicator (including the M18 variant slides).

How It’s Made

Every Faxon pistol barrel starts as a long 416-R stainless barrel blank that Faxon rifles in-house before it is ever cut into pistol barrels. That way the whole blank gets the same rifling, inspection, and stress relief, and every barrel cut from it starts from a qualified bore.

  1. Drill and ream: 416-R stainless bar gun-drilled and reamed as a long blank
  2. Button rifle: Button rifled 1:10, six grooves
  3. Air gauge: Bore and rifling air gauged
  4. Stress relieve: Stress relieved in-house after rifling, just like Faxon rifle barrels
  5. Cut and qualify: Blank cut to length and qualify-turned true to the bore
  6. Turn and mill: Hood, lugs, and Flame Fluted® profile turned and milled; 9mm SAAMI chamber and target crown cut
  7. Heat treat: 416-R heat treated to pistol-barrel hardness; 416-R isn’t hard enough for a pistol barrel as bar stock, while 4150 is
  8. Finish: Salt-bath QPQ nitrided inside and out
  9. Mark and inspect: Laser-marked and final inspected

Six-groove button rifling is land-and-groove rifling, not polygonal, so it runs jacketed and cast lead bullets. Salt-bath QPQ nitride is a diffusion treatment, not a plating: it hardens the bore and exterior and adds corrosion resistance and lubricity while adding virtually nothing to the dimensions.

How We Inspect It

Faxon pistol barrels are built to a written control plan, and each run is logged on inspection sheets. Here is what this barrel goes through before it ships.

Burr checkEvery barrel inspected for burrs under 10x magnification
Hood fitEvery hood run through a go/thru gauge
CMMFirst and last barrel of every run checked on the CMM
First articleFull CMM first-article inspection after any machine maintenance, tool change, or part change, and at least every 30 days
CertificationsMaterial certs checked at receiving; stress relief certified by lot

Flame Fluted® Profile

Faxon’s patented Flame Fluted® design cuts weight and adds surface area for faster cooling, with the distinctive Faxon look.

What’s in the Box

INCLUDED

P320 Compact 9mm barrel

416-R stainless, salt-bath QPQ nitride, inside and out, 3.84″

NOT INCLUDED

Slide, recoil assembly

Uses your factory recoil assembly.

Specifications

Caliber9mm Luger (9x19), SAAMI chamber
FitsSIG® P320 Compact slides
Length3.84″
SeriesMatch Series
ProfileFlame Fluted®
Material416-R stainless, heat treated and stress relieved
RiflingButton rifled, 1:10 twist, 6 grooves (land and groove)
InspectionBore and rifling air gauged
FinishSalt-bath QPQ nitride, inside and out
MuzzleNon-threaded, target crown
Made inGreater Cincinnati, Ohio, USA
FFLNot required

What Owners Say

“I decided to build a completely custom Sig 320 Compact and my next stop was barrels. By word of mouth and internet searches it seemed as if Faxon was the best.”

Don Brisbine, verified buyer

“I went to the range and used the new barrel. It seems to work well and I have noticed improvements in my groups.”

David, verified buyer

“Just picked this up and have only put ~200 rounds thru so far but the fit and finish are top quality. Everything I’ve run thru this so far has produced great groups out to 25yds.”

chris, verified buyer

Average rating: 5.0 out of 5 stars from 3 reviews on FaxonFirearms.com.

What Reviewers and Dealer Customers Say

“Match grade barrel... Perfect fit, functioned great.”

RCD, OpticsPlanet review • Read it ›

Quotes from third-party reviews and dealer listings; some cover the same barrel in another finish or threaded configuration.

Every Faxon Barrel for the P320 Compact

BarrelSteelMuzzleFinishMSRP
Match Series Flame Fluted® (this barrel)416-R stainlessNon-threadedBlack nitride$123
Duty Series4150 CMVNon-threadedBlack nitride$98
Duty Series4150 CMVThreadedBlack nitride$99
Match Series Flame Fluted®416-R stainlessThreadedBlack nitride$128

Match Series P320 Compact Barrel FAQs

Is this barrel drop-in?

Yes. It is a direct replacement for the factory barrel in SIG® P320 Compact slides with no gunsmithing on factory-spec slides. Some aftermarket slides may need minor fitting.

How is it rifled?

Button rifled, 1:10 twist, with six grooves. Faxon rifles a long blank in-house, air gauges the bore and rifling, and stress relieves it before cutting it into pistol barrels.

Can I shoot cast lead bullets?

Yes. Six-groove button rifling is land-and-groove rifling, not polygonal, so it runs both jacketed and cast lead bullets.

What is the difference between Duty Series and Match Series pistol barrels?

Duty Series barrels are 4150 CMV in an OEM-style profile with salt-bath nitride inside and out. Match Series barrels are 416-R stainless, heat treated for pistol-barrel hardness, and come in fluted profiles and PVD color options.

What finish is it?

Salt-bath QPQ nitride, inside and out.

Where is it made?

In Greater Cincinnati, Ohio. Pistol barrels ship without an FFL.

SIG®, SIG SAUER®, P320®, and P365® are trademarks of SIG SAUER, Inc. Faxon Firearms is not affiliated with or endorsed by them; model names are for compatibility only. Flame Fluted® and EXOS® are trademarks of Faxon Firearms. Know and follow all federal, state, and local laws.

Warranty

Faxon Lifetime Guarantee. Covers manufacturing and material defects to the original purchaser. Excludes damage from misuse, neglect, non-standard ammunition, or modifications. Register your product at faxonfirearms.com/product-registration to expedite service. For purchases through dealers or distributors, warranty repairs are handled directly by Faxon Firearms; refunds must be processed through the selling entity. Full policy: faxonfirearms.com/warranty-privacy-terms/

Customers Also Shopped These Items

Reviews

  • 5
    Great barrel!

    Posted by chris on Oct 24th 2024

    Just picked this up and have only put ~200 rounds thru so far but the fit and finish are top quality. Everything I've run thru this so far has produced great groups out to 25yds. Would highly recommend to anyone in the market for a P320 Compact sized barrel!

  • 5
    Accurate

    Posted by David on Mar 6th 2022

    I went to the range and used the new barrel. It seems to work well and I have noticed improvements in my groups. I shoot regularly. I shoot a few hundred rounds every couple months and keep consistent. So with just the barrel change, the grouping has improved. I am using a metal 320 grip and procut slide. With the barrel it makes the weapon even better. I carry it everyday as my duty weapon with confidence.

  • 5
    Awesome upgrade

    Posted by Don Brisbine on Jan 18th 2022

    I decided to build a completely custom Sig 320 Compact and my next stop was barrels. By word of mouth and internet searches it seemed as if Faxon was the best. So what the hell, yes, it might be a few extra dollars but man are thoes dollars well spent. Not only are the barrels pretty to look at, it dropped right in, had very tight lockups, and my groups were outstanding! Great job on this Faxon, keep up the great work!