FAXON EXOS-524 PISTOL COMPENSATOR FOR M&P® SHIELD/SHIELD PLUS - 9MM
FaxonFaxon EXOS-524 Pistol Compensator for M&P® Shield & Shield Plus – 9mm (1/2x28)
Overview
The Faxon EXOS-524 pistol compensator is engineered and tested for the Smith & Wesson M&P® Shield family of pistols, including the Shield 1.0, Shield 2.0, and Shield Plus. Machined from 6061 aluminum and finished in black anodize, the EXOS-524 uses a single-chamber design with uniquely angled ports to help reduce muzzle climb and manage felt recoil while maintaining consistent cycling characteristics on properly configured hosts.
Design & Engineering
- Angled port geometry redirects gas upward to counter muzzle rise
- Single-chamber compensator design optimized for compact pistol operating dynamics
- Flush-fit profile optimized for Faxon branded barrels
- For non-Faxon barrels, a protrusion of 0.600 inch or less is recommended for a flush fit
Compatibility
The EXOS-524 has been tested and confirmed compatible with:
- Smith & Wesson M&P® Shield 1.0
- Smith & Wesson M&P® Shield 2.0
- Smith & Wesson M&P® Shield Plus
What’s Included
- Faxon EXOS-524 pistol compensator
- Thread locker
- (2) 6-32 set screws
- 1/16" Allen wrench
Specifications
- Material: 6061 Aluminum
- Finish: Black Anodized
- Caliber: 9mm
- Thread Pitch: 1/2x28
- Length: 1.1 in
- Width: 0.9 in
- Height: 1.3 in
- Weight: 0.05 lb
Important: Compensators can influence pistol operating characteristics. Host-to-host results may vary depending on the complete firearm configuration.
Video: EXOS Pistol Compensators Overview
FAQs
What pistols is the EXOS-524 designed for?
The EXOS-524 has been tested and confirmed compatible with the Smith & Wesson M&P® Shield 1.0, 2.0, and Shield Plus.
What thread pitch does the EXOS-524 use?
The EXOS-524 uses 1/2x28 threading for 9mm applications.
What material and finish are used?
The EXOS-524 is machined from 6061 aluminum and finished in black anodize.
What is included with the compensator?
Each compensator includes thread locker, (2) 6-32 set screws, and a 1/16 inch Allen wrench.
Will it sit flush with the slide?
The EXOS-524 is optimized for Faxon-branded barrels. For other barrels, a protrusion of 0.600 inch or less is recommended for a flush fit.
Warranty
Backed by the Faxon Lifetime Guarantee.
All Faxon Firearms products are manufactured to exacting standards and supported for the life of the product.
https://faxonfirearms.com/warranty-privacy-terms/