FAXON MATCH SERIES FLAME FLUTED® BARREL FOR M&P® FULL SIZE GEN 1/2 9MM
FaxonDescription
Pistol Barrels › For M&P® › For M&P® Full Size
Fit and Compatibility
This barrel is a direct replacement for the factory barrel in M&P® Full Size Gen 1 and M2.0 Full Size slides. It is machined to tight tolerances for consistent lockup, and it drops into factory-spec slides with no gunsmithing. On some aftermarket slides, minor fitting may be needed.
How It’s Made
Every Faxon pistol barrel starts as a long 416-R stainless barrel blank that Faxon rifles in-house before it is ever cut into pistol barrels. That way the whole blank gets the same rifling, inspection, and stress relief, and every barrel cut from it starts from a qualified bore.
- Drill and ream: 416-R stainless bar gun-drilled and reamed as a long blank
- Button rifle: Button rifled 1:10, six grooves
- Air gauge: Bore and rifling air gauged
- Stress relieve: Stress relieved in-house after rifling, just like Faxon rifle barrels
- Cut and qualify: Blank cut to length and qualify-turned true to the bore
- Turn and mill: Hood, lugs, and Flame Fluted® profile turned and milled; 9mm SAAMI chamber and target crown cut
- Heat treat: 416-R heat treated to pistol-barrel hardness; 416-R isn’t hard enough for a pistol barrel as bar stock, while 4150 is
- Finish: Salt-bath QPQ nitrided inside and out
- Mark and inspect: Laser-marked and final inspected
Six-groove button rifling is land-and-groove rifling, not polygonal, so it runs jacketed and cast lead bullets. Salt-bath QPQ nitride is a diffusion treatment, not a plating: it hardens the bore and exterior and adds corrosion resistance and lubricity while adding virtually nothing to the dimensions.
How We Inspect It
Faxon pistol barrels are built to a written control plan, and each run is logged on inspection sheets. Here is what this barrel goes through before it ships.
| Burr check | Every barrel inspected for burrs under 10x magnification |
| Hood fit | Every hood run through a go/thru gauge |
| CMM | First and last barrel of every run checked on the CMM |
| First article | Full CMM first-article inspection after any machine maintenance, tool change, or part change, and at least every 30 days |
| Certifications | Material certs checked at receiving; stress relief certified by lot |
Flame Fluted® Profile
Faxon’s patented Flame Fluted® design cuts weight and adds surface area for faster cooling, with the distinctive Faxon look.
What’s in the Box
INCLUDED
M&P® Full Size 9mm barrel
416-R stainless, salt-bath QPQ nitride, inside and out, 4.25″
NOT INCLUDED
Slide, recoil assembly
Uses your factory recoil assembly.
Specifications
| Caliber | 9mm Luger (9x19), SAAMI chamber |
| Fits | M&P® Full Size Gen 1 and M2.0 Full Size slides |
| Length | 4.25″ |
| Series | Match Series |
| Profile | Flame Fluted® |
| Material | 416-R stainless, heat treated and stress relieved |
| Rifling | Button rifled, 1:10 twist, 6 grooves (land and groove) |
| Inspection | Bore and rifling air gauged |
| Finish | Salt-bath QPQ nitride, inside and out |
| Muzzle | Non-threaded, target crown |
| Made in | Greater Cincinnati, Ohio, USA |
| FFL | Not required |
What Owners Say
“This barrel will make hair grow on your chest.”
gregorio, verified buyer
“Took my M&P to the next level. Perfect fit and the barrel’s finish was perfect.”
Donnie Joy, verified buyer
“Use this to replace stock barrel in m&p 9mm.Shoots great and drop in fit perfectly”
Bruce Starr, verified buyer
Average rating: 4.2 out of 5 stars from 4 reviews on FaxonFirearms.com.
What Reviewers and Dealer Customers Say
“I have experienced no problems, these fit good in the M&P slides.”
Rick, OpticsPlanet review • Read it ›
“Great quality and really fast shipping. Fit perfect.”
JLB, OpticsPlanet review • Read it ›
Quotes from third-party reviews and dealer listings; some cover the same barrel in another finish or threaded configuration.
Every Faxon Barrel for the M&P® Full Size
| Barrel | Steel | Muzzle | Finish | MSRP |
|---|---|---|---|---|
| Match Series Flame Fluted® (this barrel) | 416-R stainless | Non-threaded | Black nitride | $126 |
| Duty Series | 4150 CMV | Non-threaded | Black nitride | $98 |
| Duty Series | 4150 CMV | Threaded | Black nitride | $99 |
| Match Series Flame Fluted® | 416-R stainless | Threaded | Black nitride | $131 |
Match Series M&P® Full Size Barrel FAQs
Is this barrel drop-in?
Yes. It is a direct replacement for the factory barrel in M&P® Full Size Gen 1 and M2.0 Full Size slides with no gunsmithing on factory-spec slides. Some aftermarket slides may need minor fitting.
How is it rifled?
Button rifled, 1:10 twist, with six grooves. Faxon rifles a long blank in-house, air gauges the bore and rifling, and stress relieves it before cutting it into pistol barrels.
Can I shoot cast lead bullets?
Yes. Six-groove button rifling is land-and-groove rifling, not polygonal, so it runs both jacketed and cast lead bullets.
What is the difference between Duty Series and Match Series pistol barrels?
Duty Series barrels are 4150 CMV in an OEM-style profile with salt-bath nitride inside and out. Match Series barrels are 416-R stainless, heat treated for pistol-barrel hardness, and come in fluted profiles and PVD color options.
What finish is it?
Salt-bath QPQ nitride, inside and out.
Where is it made?
In Greater Cincinnati, Ohio. Pistol barrels ship without an FFL.
M&P® and Shield® are trademarks of Smith & Wesson Inc. Faxon Firearms is not affiliated with or endorsed by them; model names are for compatibility only. Flame Fluted® and EXOS® are trademarks of Faxon Firearms. Know and follow all federal, state, and local laws.
Warranty
Faxon Lifetime Guarantee. Covers manufacturing and material defects to the original purchaser. Excludes damage from misuse, neglect, non-standard ammunition, or modifications. Register your product at faxonfirearms.com/product-registration to expedite service. For purchases through dealers or distributors, warranty repairs are handled directly by Faxon Firearms; refunds must be processed through the selling entity. Full policy: faxonfirearms.com/warranty-privacy-terms/Customers Also Shopped These Items
Reviews
-
9mm barrel
Use this to replace stock barrel in m&p 9mm.Shoots great and drop in fit perfectly
-
Great Barrel
Took my M&P to the next level. Perfect fit and the barrel's finish was perfect. Awesome barrel and a great price!!
-
M&P Fluted Barrel
Barrel looks nice and quality work on the fluting but don’t expect better accuracy from your m&p. Shoots 6-7” at 25 yards just as my stock barrel did.
-
Testosterone booster
This barrel will make hair grow on your chest.