FAXON EXOS-525 PISTOL COMPENSATOR FOR SIG® P365/P365 XL - 9MM
Faxon
$85.00
Faxon EXOS-525 Pistol Compensator for SIG® P365 & P365 XL – 9mm (1/2x28)
Overview
The Faxon EXOS-525 pistol compensator is engineered and tested for the SIG® P365 and P365 XL platforms, delivering improved shooting consistency through controlled gas redirection in a compact footprint. Machined from 6061 aluminum and finished in black anodize, the EXOS-525 utilizes a single-chamber design with uniquely angled ports to help reduce muzzle climb and manage felt recoil while supporting reliable cycling on properly configured hosts.
Design & Engineering
- Angled port geometry redirects gas upward to counter muzzle rise
- Single-chamber compensator design optimized for micro-compact pistol dynamics
- Flush-fit profile optimized for Faxon-branded barrels
- For non-Faxon barrels, a protrusion of 0.600 inch or less is recommended for a flush fit
Compatibility
The EXOS-525 has been tested and confirmed compatible with:
- SIG® P365
- SIG® P365 XL
What’s Included
- Faxon EXOS-525 pistol compensator
- Thread locker
- (2) 6-32 set screws
- 1/16" Allen wrench
Specifications
- Material: 6061 Aluminum
- Finish: Black Anodized
- Caliber: 9mm
- Thread Pitch: 1/2x28
- Length: 1.125 in
- Width: 0.900 in
- Height: 1.236 in
- Weight: 0.05 lb
Important: Compensators can influence pistol operating characteristics. Host-to-host results may vary depending on the complete firearm configuration.
Video: EXOS Pistol Compensators Overview
FAQs
What pistols is the EXOS-525 designed for?
The EXOS-525 has been tested and confirmed compatible with the SIG® P365 and SIG® P365 XL.
What thread pitch does the EXOS-525 use?
The EXOS-525 uses 1/2x28 threading for 9mm applications.
What material and finish are used?
The EXOS-525 is machined from 6061 aluminum and finished in black anodize.
What is included with the compensator?
Each compensator includes thread locker, (2) 6-32 set screws, and a 1/16 inch Allen wrench.
Will it sit flush with the slide?
The EXOS-525 is optimized for Faxon-branded barrels. For other barrels, a protrusion of 0.600 inch or less is recommended for a flush fit.
Warranty
Backed by the Faxon Lifetime Guarantee.
All Faxon Firearms products are manufactured to exacting standards and supported for the life of the product.
https://faxonfirearms.com/warranty-privacy-terms/
Backed by the Faxon Lifetime Guarantee.
All Faxon Firearms products are manufactured to exacting standards and supported for the life of the product.
https://faxonfirearms.com/warranty-privacy-terms/
-
-
-
-
Sold Out
Reviews
-
Good fit
Very happy with purchase
-
Great fit, a few notes for conceal carry
The comp works! Plain and simple defensive ammo out of a shorter sub 4” barrel has enough gas to make this run great. I do need a holster which covers it because pinches suck. The locking method of two screws works it’s way out a bit. It would probably help to provide shims to time the device and assist with a stronger friction lockup.
-
P365 Comp, best in class
A big thanks to Martin W. at Faxon for providing valued input on the selection of the Faxon EXOS-525 Comp for the Sig P365. This is the best comp yet tried, and I have tried a few. No additional tuning was required with my Strike Slide w/Sheild RMSc Red Dot, MCarbo tuning kit and trigger, and of course the Faxon match Grade Threaded Barrel. The gun fires flawlessly using both target or range ammo, Never a feed or failure to eject issue with this one. Very highly recommended.
-
Great Comp
Great compensator. Stuck it on the end of the Faxon match barrel. Just be warned that if you carry in a Kydex holster you will have to modify it to fit.
-
Works Great
Paired it with the Faxon straight-fluted barrel and it runs great. Federal hydra Shok, Hornady Critical Defense, handloads with XTP, and hard cast poly coated… all ran flawlessly and help tame muzzle rise. Very happy
-
Awesome comp
Great comp, pairs well with the Faxon barrel. Makes the gun very controllable.