Faxon Streamline 13" AR15 G3 Aluminum M-LOK Handguard - Full Rail - Anodized

 Specifications:

• Height (Flat to Flat): 1.54"
• Max Outer Diameter (Peak to Peak): 1.67"
• Max Inner Diameter: 1.34"
• Construction: 6061 Aluminum - Hard Coat Anodized
• Accessory Mounting: M-LOK

Installation Instructions:

1. Torque barrel nut to industry specs using 1-1/4” wrench to at least 35ft/lbs but no more than 60ft/lbs. DO NOT OVER-TIGHTEN.
2. Install handguard over the barrel nut aligning the upper receiver rail between the alignment tabs.
3. Install locking plate into the recess on the handguard and thread both bolts through the handguard and into the locking plate. Torque bolts to 32 in/lbs.
4. After the initial live fire test, check to make sure the bolts are still tight and not walking out.