Sold Out
FAXON EXOS-543 PISTOL COMPENSATOR FOR GLOCK® GEN 4 - 9MM
Faxon
$85.00
Faxon EXOS-543 Pistol Compensator for Glock® Gen 4 – 9mm (1/2x28)
Overview
The Faxon EXOS-543 pistol compensator is designed for Glock® Gen 4 9mm platforms to improve shooting consistency through controlled gas redirection. Machined from 6061 aluminum and finished in black anodize, the EXOS-543 uses a single-chamber design with uniquely angled ports to help reduce muzzle climb and manage felt recoil while supporting stable cycling on properly configured hosts.
Compatibility
Faxon compensators in this configuration are designed for Glock® Gen 4 9mm pistols. Fitment with other pistols or generations cannot be guaranteed. Testing for fit and function was performed on:
- Glock® 19 Gen 4
- Glock® 17 Gen 4
- Glock® 34 Gen 4
Design & Engineering
- Angled port geometry vectors gas upward rather than only sideways to reduce up/down muzzle movement
- Single-chamber compensator design optimized for handgun operating dynamics
- Flush-fit profile optimized for Faxon-branded barrels
- For non-Faxon barrels, a protrusion of 0.600 inch or less is recommended for a flush fit
What’s Included
- Faxon EXOS-543 pistol compensator
- Thread locker
- (2) 6-32 set screws
- 1/16" Allen wrench
Specifications
- Material: 6061 Aluminum
- Finish: Black Anodized
- Caliber: 9mm
- Thread Pitch: 1/2x28
- Length: 1.1 in
- Width: 1.0 in
- Height: 1.27 in
- Weight: 0.06 lb
Important: Compensators can influence pistol operating characteristics. Host-to-host results may vary depending on the complete firearm configuration.
Video: EXOS Pistol Compensators Overview
FAQs
What pistols is the EXOS-543 designed for?
The EXOS-543 is designed for Glock® Gen 4 9mm pistols and was tested on the Glock® 17 Gen 4, 19 Gen 4, and 34 Gen 4.
What thread pitch does the EXOS-543 use?
The EXOS-543 uses 1/2x28 threading for 9mm applications.
What material and finish are used?
The EXOS-543 is machined from 6061 aluminum and finished in black anodize.
What is included with the compensator?
Each compensator includes thread locker, (2) 6-32 set screws, and a 1/16 inch Allen wrench.
Will it sit flush with the slide?
The EXOS-543 is optimized for Faxon-branded barrels. For other barrels, a protrusion of 0.600 inch or less is recommended for a flush fit.
Warranty
Backed by the Faxon Lifetime Guarantee.
All Faxon Firearms products are manufactured to exacting standards and supported for the life of the product.
https://faxonfirearms.com/warranty-privacy-terms/
Backed by the Faxon Lifetime Guarantee.
All Faxon Firearms products are manufactured to exacting standards and supported for the life of the product.
https://faxonfirearms.com/warranty-privacy-terms/
- Product Type:
- Handgun Parts
- Handgun Parts:
- Compensators
-
-
Sold Out
-
-
Reviews
-
Eco Comp
Easy install. Thanks for the included lock Tite. Unit works very well on the Faxon threaded barrel on my G34
-
Quality and change
I’ve put thousands of rounds through my Glock 17. If I knew this is what a comp did, I’d have purchased one long time ago! Awesome product!
-
OUTSTANDING!
I have this on a GST9 build, with a Trybe barrel, and a GST9 “WREATH” slide. Not only does it look wicked…. The functionality is second to none. Compared to the Strikeforce compensator…. Well it doesn’t even compare.
-
Gun comp
Good product no complaints as of yet
-
Beautiful and Awesome!!!
Installed on a Shadow Systems MR920 War Poet and it looks outstanding!! I have only been able to put about 30 rounds through it so far, but it seems to really help mitigate the felt recoil! I love it! It's amazing, especially at this price point! I was hoping to be able to upload a couple of pictures here but I don't see that option.