For G17

Faxon Barrels for Glock® 17

11 drop-in 9mm barrels for Glock® 17 Gen 2, Gen 3, and Gen 4 slides and Glock® 17 Gen 5 and Gen 6 slides: 4 Duty Series ($98–$99) and 7 Match Series ($120–$133), threaded and non-threaded, made in Greater Cincinnati, Ohio. Faxon makes separate G17 Gen 2–4 and G17 Gen 5–6 barrels, so order the one for your generation. Every Faxon pistol barrel starts as a long blank that Faxon button rifles 1:10 with six grooves (land and groove, not polygonal, so cast lead is fine), air gauges, and stress relieves in-house, then qualify-turns and mills into a barrel that drops into a factory-spec slide with no gunsmithing. Every barrel is checked for burrs under 10x magnification and its hood is run through a go/thru gauge. Duty Series barrels are 4150 CMV with salt-bath QPQ nitride inside and out. Match Series barrels are 416-R stainless, heat treated for pistol-barrel hardness, with Faxon fluting and black nitride or PVD finishes (TiN, Chameleon, Nickel). Threaded barrels are 1/2x28 and include a thread protector; threaded barrels can’t ship to California. Owners rate them 5.0 out of 5 stars across 22 reviews on FaxonFirearms.com.

G17 GEN 2–4 • DUTY • NON-THREADED

Duty Series Standard ›

$98 • 4150 CMV

G17 GEN 2–4 • DUTY • THREADED

Duty Series Threaded ›

$99 • 5.0 ★ (3) • 4150 CMV

G17 GEN 2–4 • MATCH • NON-THREADED

Flame Fluted®, Black nitride ›

$123 • 5.0 ★ (5) • 416-R stainless

G17 GEN 2–4 • MATCH • THREADED

Flame Fluted®, Black nitride ›

$128 • 5.0 ★ (3) • 416-R stainless

G17 GEN 2–4 • MATCH • THREADED

Flame Fluted®, Chameleon PVD ›

$133 • 416-R stainless

G17 GEN 2–4 • MATCH • THREADED

Flame Fluted®, Gold TiN PVD ›

$133 • 416-R stainless

G17 GEN 5–6 • DUTY • NON-THREADED

Duty Series Standard ›

$98 • 4150 CMV

G17 GEN 5–6 • DUTY • THREADED

Duty Series Threaded ›

$99 • 4150 CMV

G17 GEN 5–6 • MATCH • NON-THREADED

Flame Fluted®, Black nitride ›

$120 • 416-R stainless

G17 GEN 5–6 • MATCH • THREADED

Flame Fluted®, Black nitride ›

$128 • 5.0 ★ (5) • 416-R stainless

G17 GEN 5–6 • MATCH • THREADED

Flame Fluted®, Gold TiN PVD ›

$133 • 416-R stainless

Fit notes: Glock® Gen 6: barrels from Job #16477 on (engraved on the non-ejection side of the hood) include the Gen 6 relief cut and fit the Glock® 17 Gen 5–6. Running a threaded barrel? Add a Faxon EXOS® compensator: EXOS-513 for Gen 3, EXOS-543 for Gen 4, EXOS-553 for Gen 5.

Duty Series or Match Series for Your G17?

Duty SeriesMatch Series
Barrels47
Steel4150 CMV416-R stainless, heat treated for pistol-barrel hardness
RiflingButton rifled 1:10, six grooves, air gaugedButton rifled 1:10, six grooves, air gauged
ProfileOEM-styleFlame Fluted®
FinishSalt-bath nitrideBlack nitride, Chameleon PVD, Gold TiN PVD
Threaded optionsYes, 1/2x28Yes, 1/2x28
MSRP$98–$99$120–$133

Both lines share the same bore and the same drop-in fit for Glock® 17 Gen 2–4 and Gen 5–6 slides. Pick Duty Series for a hard-wearing, OEM-style replacement at the lowest price; pick Match Series for 416-R stainless with Faxon fluting and a choice of finishes.

Every Faxon G17 Barrel, Spec by Spec

GenerationBarrelSeriesProfileFinishMuzzleMSRP
Gen 2–4Duty Series non-threaded, Salt-bath nitride
GA910N17NGQ-N
DutyOEM-styleSalt-bath nitrideNon-threaded$98
Gen 2–4Duty Series threaded, Salt-bath nitride
GA910N17NGQ-T
DutyOEM-styleSalt-bath nitride1/2x28, protector included$99
Gen 2–4Match Flame Fluted® non-threaded, Black nitride
GB910N17LGQ-N
MatchFlame Fluted®Black nitrideNon-threaded$123
Gen 2–4Match Flame Fluted® threaded, Black nitride
GB910N17LGQ-T
MatchFlame Fluted®Black nitride1/2x28, protector included$128
Gen 2–4Match Flame Fluted® threaded, Gold TiN PVD
GB910N17LGQ-T-TiN
MatchFlame Fluted®Gold TiN PVD1/2x28, protector included$133
Gen 2–4Match Flame Fluted® threaded, Chameleon PVD
GB910N17LGQ-T-NCR
MatchFlame Fluted®Chameleon PVD1/2x28, protector included$133
Gen 5–6Duty Series non-threaded, Salt-bath nitride
GA910N175NGQ-N
DutyOEM-styleSalt-bath nitrideNon-threaded$98
Gen 5–6Duty Series threaded, Salt-bath nitride
GA910N175NGQ-T
DutyOEM-styleSalt-bath nitride1/2x28, protector included$99
Gen 5–6Match Flame Fluted® non-threaded, Black nitride
GB910N175LGQ-N
MatchFlame Fluted®Black nitrideNon-threaded$120
Gen 5–6Match Flame Fluted® threaded, Black nitride
GB910N175LGQ-T
MatchFlame Fluted®Black nitride1/2x28, protector included$128
Gen 5–6Match Flame Fluted® threaded, Gold TiN PVD
GB910N175LGQ-T-TIN
MatchFlame Fluted®Gold TiN PVD1/2x28, protector included$133

All G17 barrels are 9mm, 1:10 twist, six-groove button rifled, with a SAAMI 9mm chamber and target crown.

Threaded Barrels, Comps, and Suppressors

Every threaded Faxon G17 barrel is cut 1/2x28, the common 9mm thread, and ships with a thread protector. Faxon EXOS® compensators are built for each slide: EXOS-513 for Glock® Gen 3, EXOS-543 for Glock® Gen 4, EXOS-553 for Glock® Gen 5. Thread locker comes with the comp; use it on the barrel’s muzzle threads only, not on the set screws. Running a suppressor usually calls for suppressor-height sights. Threaded barrels cannot be shipped to California.

How Faxon Pistol Barrels Are Made

  1. Bar stock gun-drilled and reamed as a long blank
  2. Button rifled 1:10 with six grooves
  3. Bore and rifling air gauged
  4. Stress relieved in-house after rifling, just like Faxon rifle barrels
  5. Blank cut to length and qualify-turned true to the bore
  6. Hood, lugs, profile, SAAMI 9mm chamber, and target crown turned and milled; threaded barrels cut 1/2x28
  7. 416-R Match Series barrels heat treated to pistol-barrel hardness
  8. Salt-bath QPQ nitride or PVD finish
  9. Every barrel checked for burrs under 10x magnification and its hood run through a go/thru gauge
  10. Laser-marked and final inspected

G17 Barrel FAQs

Do I need a Gen 2–4 or a Gen 5–6 barrel?

Pick by your slide’s generation. Faxon makes separate G17 barrels for Gen 2–4 slides and for Gen 5 and Gen 6 slides; each tile and spec row above names its generation.

Will a Gen 5 barrel fit my Gen 6?

Yes. G17 Gen 5 barrels from Job #16477 on, engraved on the non-ejection side of the hood, include the Gen 6 relief cut and fit the Glock® 17 Gen 5–6.

Are Faxon pistol barrels drop-in?

Yes. They are direct replacements for the factory barrel in factory-spec slides, with no gunsmithing. Some aftermarket slides may need minor fitting; check each product page for compatibility notes.

Can I shoot cast lead?

Yes. Six-groove button rifling is land-and-groove rifling, not polygonal, so Faxon pistol barrels run jacketed and cast lead bullets.

What is the difference between Duty Series and Match Series?

Duty Series barrels are 4150 CMV in an OEM-style profile with salt-bath nitride inside and out. Match Series barrels are 416-R stainless, heat treated for pistol-barrel hardness, and come in fluted profiles with nitride or PVD finishes.

Do threaded barrels include a thread protector?

Yes. Every threaded Faxon pistol barrel is cut 1/2x28 and ships with a thread protector. Threaded barrels cannot be shipped to California.

Do I need an FFL?

No. Pistol barrels ship directly to you.

Where are Faxon pistol barrels made?

In Greater Cincinnati, Ohio.

GLOCK® is a federally registered trademark of GLOCK, Inc. and GLOCK Ges.m.b.H. Faxon Firearms is not affiliated with or endorsed by them; model names are for compatibility only. Flame Fluted® and EXOS® are trademarks of Faxon Firearms.