Sale

CLOSEOUT: Faxon Match Series Straight Fluted Barrel for M&P® Shield/Shield Plus, 416-R, TiN PVD, Std. Length, Non-Threaded

Faxon
SKU:
M&PB910NSSOQ-N-TIN
|
UPC:
816341024342
$126.75 $85.56
$126.75
(You save $41.19 )
(7 reviews)
Current Stock:

Fitment note:  Faxon Firearms M&P Shield barrels are not drop-in compatible with M&P Shield pistols that have a Loaded Chamber Indicator lever installed (such as the California compliant variation).  If you have a pistol with the LCI lever installed (or are unsure if your pistol is drop-in compatible) please contact our Customer Service Team for more information: customerservice@faxonfirearms.com 

Faxon's Match Series Pistol Barrels for Smith and Wesson/M&P are machined 100% in-house from stress-relieved 416-R stainless steel. These barrels are then given a black Nitride or PVD coating to increase lubricity, barrel life, and resistance to surface wear. All barrels are conventionally rifled to allow a wider range of ammunition to be used, including cast lead. The barrels drop into factory-spec slides with no gunsmithing required. Better-than-factory tolerances ensure a consistent, tighter lockup than OEM.

 

Why Faxon Pistol Barrels?

  • 416-R Stainless - Only the best steels for durability, longevity, and accuracy. 
  • 9mm SAAMI Chambers - Superior accuracy with complete SAAMI compatibility & boring reliability. 
  • Tighter Tolerances - Drop-in, yet better fitment and lock-up. 
  • Conventional Rifling - Fully compatible with cast bullets
  • 11 Degree Target Crown 

 Technical Specifications: 

  • Handgun Type: M&P Shield
  • Barrel Caliber: 9mm
  • Barrel Profile: Straight Fluted, Drop In
  • Barrel Material: 416-R Stainless Steel
  • Barrel Twist: 1:10
  • Muzzle Thread: 1/2x28
  • Crown: 11-degree Target Crown
  • Finish: TiN PVD
Caliber:
9mm
Barrel Profile:
Straight Fluted, Drop In
Barrel Material:
416-R Stainless
Finish:
TiN PVD
Rifling Twist Rate:
1:10
Muzzle Thread:
N/A
Handgun Type:
M&P Shield

Reviews

  • 5
    Faxon 416-R TIN PVD standard barrel for M&P Shield/ Shield Plus

    Posted by Mike on Mar 5th 2025

    There was a question as to whether this Faxon barrel will work with a Smith and Wesson Shield Plus which is NOT California compliant. Apparently, the Cal compliant pistols have a "LCI lever in them" which interferes with the functioning of some barrels. My pistol is not a Cal compliant pistol, so the barrel works fine, It does have an "LCI" cut on the chamber end, which should not be confused with the Cal compliant pistol "LCI lever". The LCI cut allows the user to see if the pistol has a round in the chamber. The gold color of the TIN PVD looks very good against the black color of my M&P Shield pistol, and it fires Hornady Critical Duty 9mm ammunition without a problem. I have not used the +P variety, just the standard Critical Duty load. It may have more recoil.

  • 5
    Faxon Shield Barrel

    Posted by Chris Moran on Feb 21st 2025

    I have fitted Semi fit barrels for M&P s and Glocks with excellent results, I had a S&W shield with mediocre accuracy . Always thought the barrel had a sloppy fit, So i ordered a Clearance Faxon barrel , This is a match grade fit , I couldn't have done a better job if i fit it myself. I haven't shot it yet but I'm expecting great things

  • 4
    Fit M&P Shield Plus

    Posted by Shah F. on May 7th 2022

    I got the TiN coated barrel for my MP Shield Plus to replace its ported barrel. I shot 250 rounds to break it in. Performed flawless. The only reason I am giving it 4 star is because the barrel scratched heavily and I wish I had purchased dark color. Other than that it is awesome.

  • 4
    FAXON M&P SHIELD BARREL, MATCH SERIES, 9MM, 416-R, TIN COATED, NON-THREADED

    Posted by Dachub on Jan 25th 2022

    Purchased this for my M&P Shield CA Compliant pistol and just realized we have an issue. Am going to have to figure this out now... It's a pretty barrel, good quality.

  • 5
    Take my money

    Posted by Eric Z. on Jun 30th 2021

    I bought a Faxon barrel for my Glock 17. My accuracy went way up. So I figured it would help with my Shield 9mm. Yep! I oiled it a bit and just dropped it in. Racked it a bunch of times. It fit and locked up so perfect. It’s shooting much better then the stock barrel and it looks amazing. Stop thinking and start shooting.

  • 5
    M&P Shield Barrel

    Posted by Chris on May 14th 2021

    REALLY solid metal work, looks phenomenal, accuracy was on point, and very quick shipping. My only feedback I have is this barrel will not fit on CA compliant shields due to the "loaded chamber indicator". Unless I missed it somewhere I don't believe faxon stated that anywhere before purchasing.

  • 5
    S&W shield barrel replacement

    Posted by Eric on Apr 15th 2021

    I purchased this barrel because of the great reputation Faxon has. I had never purchased anything from Faxon in the past, but I can assure you this barrel will not be the last product I buy. The fit was perfect. The accuracy was phenomenal. I replaced my ported Performance Center barrel, because having a defensive handgun with a ported barrel has proven very loud in the past.